Z1 Series
1 / 12Pages

Catalog excerpts

Z1 Series - 1

Single station suction systems SUCTION SYSTEMS

Open the catalog to page 1
Z1 Series - 2

Z1 ECO with filter bag for work stations and dust-generating devices Z1 ECO PRO with permanent filter system for work stations and dust-generating devices Z1 CAM with filter bag for milling machines in dental production Z1 CAM PRO with permanent filter system for milling machines in dental production Options for the exhaust air connection The standard equipment of the Z1 suction systems includes a diffusor at the output of the system, which guarantees the legally prescribed exhaust air flow of a maximum of one meter per second. Alternatively, an H14 filter or an activated carbon filter can...

Open the catalog to page 2
Z1 Series - 3

Motor technology The new Smart Drive control for carbon brush motors is installed in the suction systems Z1 ECO and Z1 CAM. This technology ensures a guaranteed motor operating time of 1500 hours without changing the carbon brushes. In addition, the long running time can be increased considerably by the possibility of changing the carbon brushes. IFA certificate for dust-related testing by the DGUV The suffix refers to suction systems in dental laboratories. It confirms that the dust extractor meets the requirements of the test specification DIN EN 60335-2-69, Appendix AA (degree of dust...

Open the catalog to page 3
Z1 Series - 4

THE DEVICE WITH FILTER BAG Z1 ECO / Z1 CAM For normal to high dust levels and small milling machines The types Z1 ECO and Z1 CAM are suitable for a wide range of applications due to their large filter bags. Their volume of 11 litres is unique in the dental field for single station units. In addition, the dust container in these systems is enclosed and stabilized in a basket, which optimizes the filling efficiency and increases the suction power at the work station or at the machine. The filter bags, when removed, can be hermetically sealed by a special label, thus ensuring a dust free and...

Open the catalog to page 4
Z1 Series - 5

THE SYSTEM WITH PERMANENT FILTER Z1 ECO PRO / Z1 CAM PRO for long working intervals with high dust generation The professional versions Z1 ECO PRO and Z1 CAM PRO have a permanent filter system with 2 ultra-fine filter cartridges instead of a filter bag. These are, independently from each other, cleaned at regular intervals; the dust falls downward and is collected in a container. The low-dust disposal is ensured by removing the dust with a bin liner provided with a drawstring for sealing. The periodic cleaning of the two Z1 filter cartridges is effected automatically by the intelligent...

Open the catalog to page 5
Z1 Series - 6

SMART-DRIVE CONTROL SYSTEM FOR CARBON BRUSH MOTORS Motor after 1000 hours of runtime and conventional control Motor after 1000 hours of runtime and Smart-Drive control The future-orientated control system for carbon brush motors A fundamentally new electronic system for controlling the motor has been developed for all Z1series suction units. It is operated as a pure DC motor and achieves a guaranteed running time of 1500 hours without changing the carbon brushes. This high running time can be increased considerably by the possibility of changing the carbon brushes. The impressive lifetime...

Open the catalog to page 6
Z1 Series - 7

IFA CERTIFICATE FOR DUST-RELATED TESTING Suction systems with test certificate GS-IFA-M20 are systems with clean air recirculation into the working room listed by the German Employers‘ Liability Insurance Association. They can be used for all types of dust generated in the dental laboratory; this also includes cobalt-containing dental alloys in the usual processing techniques and quantities used in the sector. According to TRGS 561 (10/2017), due to their „state of the art“ and their supervised good filter and suction performance, their use is allowed in the laboratory without the need to...

Open the catalog to page 7
Z1 Series - 8

TOOL-FREE CHANGE OF FILTER AND MOTOR To keep the service of your suction unit Z1simple and cost-effective, we made sure during the development of the device that no tools are required to change filter, motor or carbon brushes. With a few simple moves and in a very short time you can change these components at the workplace by yourself. ZUBLER EXTRACTION TECHNOLOGY APP To control the perfect function of your suction system, information about the condition of single elements is very important. Using the Zubler Extraction Technology App and a Bluetooth connection to the machine, you can check...

Open the catalog to page 8
Z1 Series - 9

MULTIFUNCTIONAL EXHAUST AIR CONNECTION Where to put the exhaust air? The GS-IFA M20 regulation regarding dental equipment for clean air recirculation describes very accurately that the outgoing air from a suction system at a height of 50mm and a radius of 1m must not exceed a speed of 1m/sec. All Z1 suction units have been designed with reference to these regulations and have been tested conclusively. Observing the values listed above, you can choose from four variants of exhaust air conduction, which are described below: Diffusor The diffusor is delivered as standard. Its function is to...

Open the catalog to page 9
Z1 Series - 10

PRODUCT COMPARISON Suction capacity in litres/second permanent filter permanent filter 230V / 110V automatic socket for devices up to 1200W / 600W Interface for milling machines and devices with 24V output /SPS Guaranteed minimum motor running time without changing the carbon brushes Carbon brushes can be exchanged Interface for external control unit or for switch Bluetooth interface for individual settings via Android- APP Adapter for exhaust air to the outside (optional) Exhaust air filter of filter class H14 for unit dust class H (optional) Active carbon filter for exhaust air (optional)...

Open the catalog to page 10
Z1 Series - 11

Suction unit Suction unit Suction unit Suction unit Suction unit Suction unit SL-K data cable for connection of KaVo K-Control grinding systems 24 Volt interface cable Round plug 4-pole for VHF Item No.: 825/25610 24 Volt interface cable Round plug 6-pole for VHF Item No.: 825/25611 SL-Qube data cable for connection of Schick Qube grinding systems Item No.: 825/25648 24 Volt interface cable D-SUB 9-pole for Amann-Girrbach Item No.: 825/25612 24 Volt interface cable Jack plug for Roland DG Item No.: 825/25613 24 Volt interface cable open end Item No.: 825/25614 24 Volt interface cable D-SUB...

Open the catalog to page 11

All 88Dent catalogs and technical brochures

  1. Software

    14 Pages

  2. Scanner

    7 Pages