IRB 1010
334Pages

Trace back information: Workspace 23A version a14 Checked in 2023-03-20 Skribenta version 5.5.019

Product manual IRB 1010-1.5/0.370 OmniCore Document ID: 3HAC081964-001 Revision: C © Copyright 2023 ABB. All rights reserved. Specifications subject to change without notice.

The information in this manual is subject to change without notice and should not be construed as a commitment by ABB. ABB assumes no responsibility for any errors that may appear in this manual. Except as may be expressly stated anywhere in this manual, nothing herein shall be construed as any kind of guarantee or warranty by ABB for losses, damage to persons or property, fitness for a specific purpose or the like. In no event shall ABB be liable for incidental or consequential damages arising from use of this manual and products described herein. This manual and parts thereof must not be...

Manipulator description 3HAC081964-001 Revision: C © Copyright 2023 ABB. All rights reserved.

Product manual - IRB 1010 3HAC081964-001 Revision: C © Copyright 2023 ABB. All rights reserved.

Reference information 3HAC081964-001 Revision: C © Copyright 2023 ABB. All rights reserved.

This page is intentionally left blank

Overview of this manual Overview of this manual About this manual This manual contains instructions for: • mechanical and electrical installation of the IRB 1010 mechanical and electrical repair of the IRB 1010 The robot described in this manual has the following protection types: • Usage This manual should be used during: • installation and commissioning, from lifting the product to its work site and securing it to the foundation, to making it ready for operation maintenance work repair work decommissioning work Note It is the responsibility of the integrator to conduct a risk assessment...

Overview of this manual Continued References Documentation referred to in the manual, is listed in the table below. Document name Product manual, spare parts - IRB 1010 Safety manual for robot - Manipulator and IRC5 or OmniCore con- 3HAC031045-001 troller i Product manual - OmniCore E10 Operating manual - OmniCore Application manual - Controller software OmniCore Technical reference manual - Event logs for RobotWare 7 Technical reference manual - Lubrication in gearboxes Technical reference manual - System parameters This manual contains all safety instructions from the product manuals for...

Product documentation Product documentation Categories for user documentation from ABB Robotics The user documentation from ABB Robotics is divided into a number of categories. This listing is based on the type of information in the documents, regardless of whether the products are standard or optional. Tip All documents can be found via myABB Business Portal, www.abb.com/myABB. Product manuals Manipulators, controllers, DressPack/SpotPack, and most other hardware is delivered with a Product manual that generally contains: • Safety information. Installation and commissioning (descriptions...

Product documentation Continued Operating manuals The operating manuals describe hands-on handling of the products. The manuals are aimed at those having first-hand operational contact with the product, that is production cell operators, programmers, and troubleshooters. Product manual - IRB 1010 3HAC081964-001 Revision: C © Copyright 2023 ABB. All rights reserved.

How to read the product manual How to read the product manual Reading the procedures The procedures contain all information required for the installation or service activity and can be printed out separately when needed for a certain service procedure. Safety information The manual includes a separate safety chapter that must be read through before proceeding with any service or installation procedures. All procedures also include specific safety information when dangerous steps are to be performed. Read more in the chapter Safety on page 15. Illustrations The product is illustrated with...

This page is intentionally left blank

1 Safety 1.1.1 Limitation of liability 1 Safety 1.1 Safety information 1.1.1 Limitation of liability Limitation of liability Any information given in this manual regarding safety must not be construed as a warranty by ABB that the industrial robot will not cause injury or damage even if all safety instructions are complied with. The information does not cover how to design, install and operate a robot system, nor does it cover all peripheral equipment that can influence the safety of the robot system. In particular, liability cannot be accepted if injury or damage has been caused for any of...

1 Safety 1.1.2 Requirements on personnel 1.1.2 Requirements on personnel General Only personnel with appropriate training are allowed to install, maintain, service, repair, and use the robot. This includes electrical, mechanical, hydraulics, pneumatics, and other hazards identified in the risk assessment. Persons who are under the influence of alcohol, drugs or any other intoxicating substances are not allowed to install, maintain, service, repair, or use the robot. The plant liable must make sure that the personnel is trained on the robot, and on responding to emergency or abnormal...

1 Safety 1.2.1 Safety signals in the manual 1.2 Safety signals and symbols 1.2.1 Safety signals in the manual Introduction to safety signals This section specifies all safety signals used in the user manuals. Each signal consists of: • A caption specifying the hazard level (DANGER, WARNING, or CAUTION) and the type of hazard. Instruction about how to reduce the hazard to an acceptable level. A brief description of remaining hazards, if not adequately reduced. Hazard levels The table below defines the captions specifying the hazard levels used throughout this manual. Symbol Signal word used...

1 Safety 1.2.1 Safety signals in the manual Continued Signal word used to indicate where to find additional information or how to do an operation in an easier way. Product manual - IRB 1010 3HAC081964-001 Revision: C © Copyright 2023 ABB. All rights reserved.