TESTREPORT Doc. Nr.: 100127651 Date: July 26th, 2010 Page 1 of 2 Compatibility test between CEIA Walk-Through Metal Detectors and EasyRoller2 WTMD models CEIA 02PN20 WTMD for airport application used for the test CEIA SMD601 WTMD for very high sensitivity application Item under test Standard wheelchair manufactured with metal components are usually generating an alarm on the Walk-Through Metal Detector during the transit therefore the person on the wheel chair cannot be properly screened using the Walk-Through Metal Detector. EasyRoller 2 is a special wheelchair completely metal free according to the manufacturer specifications. The goal of this test has been to verify the compatibility of the CEIA Walk-Through Metal Detectors models 02PN20 and SMD601 with the EasyRoller2. in order to verify the signals measured by the Walk-Through Metal Detector, a laptop with CEIA MD-SCOPE application has been used. The laptop was connected to the Walk-Through Metal Detector via RS-232. This document is property of CEIA S.p.A.. All right reserved MOD. AQ0020rev1

CEIA 02PN20 for airport application CEIA SMD601 for high sensitivity application Equipment, verification tools and instruments used CEIA MDSCOPE software RS-232 serial cable Laptop This document is property of CEIA S.p.A.. All right reserved MOD. AQ0020rev1