9000ARL | 9100ARL ADJUSTABLE ROLLER LATCH MORTISE LOCK

9100ARL ADJUSTABLE ROLLER LATCH MORTISE LOCK Roller latch locks are now available with an adjustment to address both tension and latch projection. Designed for doors that do not have any active levers, knobs or thumb latches, the Adjustable Roller Latch can be adjusted in the door for wind, weather and climate changes while maintaining security.

9000ARL | 9100ARL FIELD ADJUSTABILITY • Adjust latch projection and spring tension onsite to provide greater holding capacity and security CLIMATE PROTECTION • Adapt to different weather conditions that can cause pressure on the opening including wind, change in temperatures, etc. by adjusting latch accordingly TRIM OPTIONS • Pair with flush pulls, rigid 7200P back-to-back pulls, or custom architectural pulls in a variety of finishes or custom sizes. NEW ADJUSTABLE ROLLER LATCH 11

LATCH PROJECTION Use a 3/32” Allen Wrench and turn clockwise to retract the latch bolt (adjustment is from adjust the spring tension of the lock (adjustment To reverse, turn counterclockwise. | Use a 5/32” Allen Wrench and turn clockwise to To reverse, turn counterclockwise.

Designed with strike detent to accommodate roller latch. PASSAGE ROLLER LATCH STRIKE DEADBOLT ROLLER LATCH STRIKE

CASE: Heavy gauge, plated steel (15⁄16'' thick) ARMOR FRONT: Adjustable bevel brass, bronze, or stainless steel, finished as required. LATCH BOLT: Brass/Delrin 1⁄2'' throw DEADBOLT: Brass, 1'' throw. (Other throw sizes available as a custom order. Please call for assistance.) STRIKE: 4 7⁄8'' ASA HUBS: No hubs standard. If rigid hubs are required, please specify -F suffix for rigid handles, indicate spindle size or trim manufacturer. * To accommodate through-bolting 1 ½” to 111⁄16” center to center A: 1 1⁄4” (9100ARL locks, for 1 3⁄4” thick doors) 1” (9000ARL locks, for 13⁄8” thick doors) 11 DUST...

9000ARL | 9100ARL Functions 9022ARL | 9122ARL DOUBLE CYLINDER ROLLER LATCH 9024ARL | 9124ARL ROLLER LATCH LOCK For push/pull privacy applications. For push/pull privacy applications. Deadbolt by key outside and inside. Deadbolt by key outside and thumb turn inside. 9025ARL | 9125ARL PASSAGE OR CLOSET ROLLER LATCH 9039ARL | 9139ARL PRIVACY ROLLER LATCH For push/pull passage applications. For push/pull privacy applications. Deadbolt by thumb turn inside and optional emergency key outside.

Accurate Trim 7200P DOUBLE SIDED PULL 7200P-S SINGLE RIGID PULL

CYLINDERS & KEYING 9100ARL Series locks accept any standard American compatibility with other manufacturers’ cylinders, mortise cylinder. For details on required cams and please visit: Accurate Support. Applicable finishes come standard with Cerakote Premium Protective Coating. Available in gloss or matte. * Trim options (including Accurate Levers) may not be available in US32D, US32, US9, or US10 finish. Please call for assistance. To view example of finishes visit: Accurate Finishes. 11

FUNCTIONS See available functions (pg. 7) FINISHES See available finishes (pg.9) BACKSET 21⁄2”, 2 3⁄4 ” TRIM Accurate Rigid Pulls (pg. 6) If rigid hubs are required, please specify -F suffix for rigid handles, indicate spindle size or trim manufacturer Adjustable Roller Latch | Double Cylinder | Accurate Trim E.g.: 9122ARL.212.7200P.US26D.RH.134 FURNISHED STANDARD WITH ADJUSTABLE LATCH BOLT For compatibility, please call for assistance. Adjustable Roller Latch | Passage | Other Manufacturers’ Trim E.g.: 9125ARL.234.8mm.US3.LH.134 Adjustable Roller Latch | Privacy | Accurate Trim E.g.: 9139ARL.234.7200P.US10B.RH.134...

ACCURATE LOCK & HARDWARE MANUFACTURERS OF LOCKS AND CUSTOM ARCHITECTURAL HARDWARE 1 Annie Place | Stamford, CT 06902 P: 203.348.8865 F: 203.348.5234 E: [email protected] www.accuratelockandhardware.com