Addfield AES100 (2SEC) Compact Incinerator Datasheet
3Pages

{{requestButtons}}

Catalog excerpts

Addfield AES100 (2SEC) Compact Incinerator Datasheet - 1

AES100 (2SEC) The AES100 (2SEC) is a compact medical incinerator, ideal for the incineration of laboratory waste. Primary Chamber QUALITY ASSURED FIRM The AES100 (2SEC) is our low capacity incinerator that runs at 850°C/1100°C with a two second residual time, making it ideal for incinerating most medical waste types. The most compact incinerator in our range, the AES100 (2SEC) has a 50kg load capacity and a 0.20m3 chamber volume. Made from lightweight yet durable materials making it a highly versatile machine that can be trailer mounted and used as mobile incineration unit. The AES100 (2SEC) machines are fully DEFRA and DARD approved to burn less than 50kg/hr. Machine Specification Weight (approx tonnes) Nominal Burn Rate Thermal Capacity (kW) Door Aperture Control Panel Fully insulated internal lining with a total thickness of 100mm. 75mm high grade concrete lining and 25mm block 1000 insulation board lining, with a coated protective zirconia paint finish. Manually opening, securely locking, access lid. Automatic temperature controlled on-off waste ignition burner complete with internal air fans. Primary combustion burner air fans, automatically controlled distribution to their designated area. One temperature sensor mounted point. Secondary Chamber Fully insulated internal refractory lining. Constructed from 80mm high grade, low thermal mass insulation. One secondary chamber burnout burner, temperature controlled on-off, complete with air fans. Integrated combustion burner air fans with automatically controlled distribution to their designated areas. One temperature sensor mounting point at the top of the chamber, ensuring the chamber maintain the necessary 850°C minimum. Waste Type Clinical Waste Treated Waste Anatomical Waste Cytotoxic & Cytostatic Waste Offensive/Hygiene Waste *We reserve the right to change the specification, dimensions and quality of materials from time to time, so long as the alteration is minor or an improvement to the said product. Medicinal Waste Domestic (municipal) Waste

Open the catalog to page 1
Addfield AES100 (2SEC) Compact Incinerator Datasheet - 2

The Addfield Difference • Prefabricated robust mild steel casing, seam welded and suitably stiffened/ braced where necessary. • Lightweight resilient refractory fibre insulation lid, providing a tight seal, giving excellent thermal efficiency. • Primary and secondary chamber lining thickness at 100mm. • Steel shell structures are painted using our premium two-pack, high grade paint system, resulting in a glossy finish. • Our AIC control panel located at the rear of the machine controls the function, temperatures and times of the incineration process. • Multi-layered refractory lining using...

Open the catalog to page 2
Addfield AES100 (2SEC) Compact Incinerator Datasheet - 3

CHECKED COMMENTS CHECKED COMMENTS This drawing and any information or descriptive material set out on it are the confidential and copyright propertyof Addfield Enviromental Systems, and MUST NOT BEDISCLOSED, COPIED, LOANED in whole or part or used for any purpose without the written permission of Addfield Enviromental Systems. Addfield Environmental Systems LTD (2018) DATE CREATED: Addfield Environmental Systems LTD Unit 9, Zone 4 Burntwood Business Park Staffordshire WS7 3XD (UNLESS STATED OTHERWISE) THIRD ANGLE PROJECTION (UNLESS STATED OTHERWIS

Open the catalog to page 3

All Addfield Environmental Systems catalogs and technical brochures

  1. A50-IC (1)

    3 Pages

  2. MINI AB

    3 Pages

  3. A50L

    3 Pages

  4. TB

    3 Pages

  5. N20-AA

    5 Pages

  6. N20

    5 Pages

  7. PHOENIX 3

    5 Pages

  8. PHOENIX 2

    5 Pages

  9. PHOENIX 1

    5 Pages

  10. N20-SA

    5 Pages