The GM Range is purpose built for clean efficient waste destruction. Large top loading incinerator for secure disposal of sharps, general medical, clinical, and pathological waste. Primary Chamber QUALITY ASSURED FIRM QUALITY ASSURED FIRM The GM1300 is a large top loading incinerator. Designed for complete destruction of general medical waste. Manufactured to deliver optimum results through retaining maximum heat within the main chamber. Constructed with a multi layered 180mm brick refractory placing our machines at the forefront of quality. The GM1300 has a 2.3m³ chamber volume, making it ideal for smaller hospitals and clinical practices. Utilising pulse firing burners, our GM range of incinerators are up to 40% more efficient than other machines, saving fuel and money. This machine is perfect for hospitals and clinical centres. Machine Specification External L x W x H (mm) Weight (approx tonnes) Nominal Burn Rate UK* (kg/hr) Burn Rate [Export Only]* (kg/hr) Thermal Capacity (kW) Door Aperture (mm) Control Panel Secondary Chamber • Fully insulated internal refractory lining. Constructed from high grade low thermal mass insulation. • Temperature controlled Secondary chamber burnout burner with automatic on-off control, complete with internal air fans. • Integrated combustion burner air fans automatically controlling distribution to designated areas. • Temperature sensor mounting point at the top of the chamber, ensuring the chamber reaches the required 1100°C minimum, with a 2 second retention time. Power Supply 50/60 hz (three phase) • Pre-cast block impact zone protecting refractory lining during loading. • Heavily insulated internal brick refractory, constructed along an interlocking systems to ensure maximum strength and resilience. • Premium grade high alumina content refractory brick work delivering optimal thermal retention. • Top loading counter balanced insulated access lid. • Temperature controlled waste ignition burner automatic on-off, complete with internal air fans. Waste Type (single phase 110-120v on request) Clinical Waste Treated Waste Fuel Types Anatomical Waste Insulation Board Cytotoxic & Cytostatic Waste Insulation Fire Brick Fire Brick (Alumina) Offensive/Hygiene Waste *We reserve the right to change the specification, dimensions and quality of materials from time to time, so long as the alteration is minor or an improvement to the said product. Medicinal Waste Domestic (municipal) Waste Addfield Environmental Systems Limited Unit 9 | Zone 4 | Burntwood Business Park Staffordshire | WS7 3XD | United Kingdom © Addfield Environmental Systems Ltd. All information should be used as a guide only, specifications are subject to change without notice.

The GM Range is purpose built for clean efficient waste destruction. Waste Loading and De-Ashing The GM range of incinerators are designed for top loading directly into the primary chamber. Loading can be manual or mechanically through digger or hydraulic bin tippler. To be loaded no more than once per day prior to operation. The incineration process will reduce the waste to approximately 3% volume, ash. The ash should be removed before the following waste is loaded to ensure optimum burn rates. Optional deashing doors are available. The Addfield Difference • Pre-Fabricated 8mm & 10mm robust...

THIRD ANGLE PROJECTION (UNLESS STATED OTHERWISE) TOLERANCES UNLESS OTHERWISE STATED ANGULAR up to 400 45' addfieldIncinerate-Cremate T: +44 (0)1543 571 280 E: [email protected] www.addfield.com Addfield Environmental Systems LTD Unit 9, Zone 4 Burntwood Business Park Staffordshire WS7 3XD Addfield Environmental Systems LTD MUST NOT BE DISCLOSED, COPIED, LOANED in whole or part or used for any DRAWING No. GM1300 Sale GA SHEET 1 OF 1 I SCALE: