Designed to incinerate all General Medical (GM) waste. Medium sized top loading incinerator for secure dispoal of sharps, general medical, clinical, and pathological waste. QUALITY ASSURED FIRM QUALITY ASSURED FIRM The GM750 is a large top loading incinerator. Designed for complete destruction of general medical waste. Manufactured to deliver optimum results through retaining maximum heat within the main chamber. Constructed with a multi layered 180mm brick refractory placing our machines at the forefront of quality. The GM750 has a 1.54m3 chamber volume, making it ideal for smaller hospitals and clinical practices. Utilising pulse firing burners, our GM range of incinerators are up to 40% more efficient than other machines, saving fuel and money. This machine is perfect for laboratories and hospitals. Machine Specification Weight (approx tonnes) Nominal Burn Rate UK* (kg/hr) Burn Rate [Export Only]* (kg/hr) Power Supply 50/60 hz (three phase) Door Aperture Control Panel Fuel Types Insulation Board Insulation Fire Brick Fire Brick (Alumina) 220 - 250v (single phase 110-120v on request) *We reserve the right to change the specification, dimensions and quality of materials from time to time, so long as the alteration is minor or an improvement to the said product. addF eld Incinerate Cremate Primary Chamber • Pre-cast block impact zone protecting refractory lining during loading. • Heavily insulated internal brick refractory, constructed along an interlocking systems to ensure maximum strength and resilience. • Premium grade high alumina content refractory brick work delivering optimal thermal retention. • Top loading counter balanced insulated access lid. • Temperature controlled waste ignition burner automatic on-off, complete with internal air fans. Secondary Chamber • Fully insulated internal refractory lining. Constructed from high grade low thermal mass insulation. • Temperature controlled Secondary chamber burnout burner with automatic on-off control, complete with internal air fans. • Integrated combustion burner air fans automatically controlling distribution to designated areas. • Temperature sensor mounting point at the top of the chamber, ensuring the chamber reaches the required 1100°C minimum, with a 2 second retention time. Waste Type Addfield Environmental Systems Limited Unit 9l|iZone 4l|lBurntwood Business Park Staffordshire! | |WS7 3XDl | lUnited Kingdom © Addfield Environmental Systems Ltd. All information should be used as a guide only, specifications are subject to change without notice.

Designed to incinerate all General Medical (GM) waste. Waste Loading and De-Ashing The GM range of incinerators are designed for top loading directly into the primary chamber. Loading can be manual or mechanically through digger or hydraulic bin tippler. To be loaded no more than once per day prior to operation. The incineration process will reduce the waste to approximately 3% volume, ash. The ash should be removed before the following waste is loaded to ensure optimum burn rates. Optional deashing doors are available. The Addfield Difference • Pre-Fabricated 8mm & 10mm robust mild steel casing,...

3572.19 Kg THIRD ANGLE PROJECTION (UNLESS STATED OTHERWISE) TOLERANCES UNLESS OTHERWISE STATED FABRICATION Addfield Environmental Systems LTD Unit 9, Zone 4 Burntwood Business Park Staffordshire WS7 3XD Addfield Environmental Systems LTD This drawing and any information or descriptive material set out on it are the confidential and copyright propertyof Addfield Enviromental Systems, and MUST NOT BE DISCLOSED, COPIED, LOANED in whole or part or used for any purpose without the written permission of Addfield Enviromental Systems. GM750 Sale GA SHEET 1 OF 1 SCALE: 2