High Capacity The Rapid1000 high capacity incinerator is an ideal solution to batch loading of solid waste. Having a 3000kg loading capacity and reinforced loading chamber enables even large waste to be easily loaded. Designed for easy and fast deployment for static installation alongside mobile options. Providing essential support to maintaining biosecurity. Built to rapidly handle a wide range of solid waste able to achieve a burn rate of 500kg/hr to 1000kg/ hr. A highly robust and thermally efficient solution benefiting from an advanced burn chamber to ensure a smooth and equal burn. Multiple sub chamber doors allow rapid de-ashing during and after the incineration process has been completed. Machine Specification External L x W x H (mm) Internal Upper Chamber L x W x H (mm) Internal Lower Chamber L x W x H (mm) Load Chamber Volume (m3) Weight (approx tonnes) Max Load Capacity (kg) Thermal Capacity (kW) Door Aperture Fuel Types Insulation Board Insulation Fire Brick Fire Brick (Alumina) *We reserve the right to change the specification, dimensions and quality of materials from time to time, so long as the alteration is minor or an improvement to the said product. addField Incinerate Cremate Primary Chamber • Fully insulated internal refractory lining, constructed from high grade refractory brick ensuring a self-supporting, interlocked arrangement. • Fully interlocked, manually operated, access door. • Waste ignition burner, temperature controlled on-off, complete with internal air fans. • Grated hearth combustion burner, temperature controlled on-off, complete with internal air fans. • Secondary combustion burner air fans with automatically controlled distribution to their designated area. • One temperature sensor mounting points. Secondary Chamber • Fully insulated internal refractory lining. Constructed from high grade low thermal mass insulation. • Temperature controlled Secondary chamber burnout burner with automatic on-off control, complete with internal air fans. • Integrated combustion burner air fans automatically controlling distribution to designated areas. • Temperature sensor mounting point at the top of the chamber, ensuring the chamber reaches the required 850°C minimum, with a 2 second retention time. Waste Type Addfield Environmental Systems Limited Unit 9l||Zone 4l|lBurntwood Business Park Staffordshire! ||WS7 3XD|||United Kingdom © Addfield Environmental Systems Ltd. All information should be used as a guide only, specifications are subject to change without notice.

Waste Loading and De-Ashing Loading can be carried out either mechanically or manually through the vertical opening hydraulically operated lid. The ash removal will be manually through the front ash doors, a full set of de-ashing tools are included with every Rapid machine. To de-ash simply push the de-ashing button on the control panel, this will isolate the lower burners to allow ash doors to open for ash removal. • Pre-fabricated 8mm & 10mm robust mild steel casing, seam welded and suitably stiffened/ braced where necessary. • Lightweight resilient refractory fibre insulation door, providing...

3170 4285 Material: Plain Carbon Steel Specification: n/a Harjot Bhullar Notes ALL DIMENSIONS ARE SUBJECT TO CHANGE AND SHOULD BE USED AS A GUIDE ONY addFieldIncinerate'Cremate Scale: 1:60 Weight: 24492.01 kg Last saved THIS DRAWING AND ALL INFORMATION CONTAINED HEREON IS THE PROPERTY OF ADDFIELD ENVIRONMENTAL SYSTEMS LIMITED, WITHOUT WHOSE PERMISSION IT MAY NOT BE COPIED SHOWN OR OTHERWISE USED AND IT IS TO BE RETURNED PROMPTLY ON REQUEST. 10 April 2017 14:32:49 Tolerances, Unless otherwise stated WHOLE NUMBERS ± 0.20 1 DECIMAL PLACE 0.10 2 DECIMAL PLACE ± 0.05 ANGLES 0.5° :inish, 3. Unless...