Catalogs >
Addfield Environmental Systems >
Addfield TB Equine Cremation Machine Datasheet

Addfield TB Equine Cremation Machine Datasheet
1 / 3Pages

Catalog excerpts

Addfield TB Equine Cremation Machine Datasheet - 1

Large equine cremation machine. Top loading horse cremation machine. Advanced design to eﬃciently cremate most full size adult horses QUALITY ASSURED FIRM QUALITY ASSURED FIRM Large top loading equine cremation machine. Designed and built along the latest advances in safe cremation. Having a multi layered brick based refractory achieving a 40% reduction in fuel consumption compared to alternative solutions. Easy loading with reinforced concrete for hard wearing easy operation. DEFRA approved and compliant with EU Animal By Products Regulations. 1300kg loading capacity. Range of adaptations available to suit your equine crematorium. Machine Speciﬁcation External L x W x H (mm) Weight (approx tonnes) Nominal Burn Rate UK* (kg/hr) Burn Rate [Export Only]* (kg/hr) Primary Chamber Pre-cast block impact zone protecting refractory Primary Chamber lining during loading. • Heavily insulated internal brick refractory, constructed along an interlocking systems to ensure maximum strength and resilience. • Premium grade high alumina content refractory brickwork delivering optimal thermal retention. • Top loading counter balanced insulated access lid. • Temperature controlled waste ignition burner automatic on-oﬀ, complete with internal air fans. Secondary Chamber Fully insulated internal refractory lining. Secondary Chamber Constructed from high grade low thermal mass insulation. • Temperature controlled Secondary chamber burnout burner with automatic on-oﬀ control, complete with internal air fans. • Integrated combustion burner air fans automatically controlling distribution to designated areas. • Temperature sensor mounting point at the top of the chamber, ensuring the chamber reaches the required 850°C minimum, with a 2 second retention time. Thermal Capacity (kW) Power Supply 50/60 hz Optional Extras Control Panel Fuel Types Insulation Board Insulation Fire Brick Lift Table Fire Brick (Alumina) De-ashing Tool Fuel Tank Door Aperture *We reserve the right to change the speciﬁcation, dimensions and quality of materials from time to time, so long as the alteration is minor or an improvement to the said product. Addﬁeld Environmental Systems Limited Unit 9 | Zone 4 | Burntwood Business Park Staﬀordshire | WS7 3XD | United Kingdom © Addﬁeld Environmental Systems Ltd. All information should be used as a guide only, speciﬁcations are

Open the catalog to page 1

Addfield TB Equine Cremation Machine Datasheet - 2

Large equine cremation machine. Waste Loading and De-Ashing Designed for top loading directly into the primary chamber. Loading can be manual or mechanically through winch or hydraulic bin tippler. To be loaded no more than once per day prior to operation. The incineration process will reduce the waste to approximately 3% volume ash. The ash should be removed before the following waste is loaded to ensure optimum burn rates. Optional de-ashing doors are available. The Addﬁeld Diﬀerence • Pre-Fabricated 8mm & 10mm robust mild steel casing, seam welded and suitably stiﬀened/ braced where...

Open the catalog to page 2

Addfield TB Equine Cremation Machine Datasheet - 3

THIRD ANGLE PROJECTION (UNLESS STATED OTHERWISE) TOLERANCES UNLESS OTHERWISE STATED Add eld Environmental Systems LTD This drawing and any information or descriptive material set out on it are the con dential and copyright propertyof Add eld Enviromental Systems, and MUST NOT BE DISCLOSED, COPIED, LOANED in whole or part or used for any purpose without the written permission of Add eld Enviromental Systems. addfieldIncinerate • Cremate T: +44 (0)1543 571 280 E: sales@add eld.com www.addeld.com Add eld Environmental Systems LTD Unit 9, Zone 4 Burntwood Business Park Sta ordshire WS7 3XD TB...

Open the catalog to page 3