"I THUNDER 500 Mid-sized Aquacultural incinerator, ideal solution for high moisture fish farm and marine waste, maintain biosecurity. CHAS QUALITY ASSURED FII ISQ9001 QUALITY ASSURED FIRM ISO 14001 Maintain your biosecurity through securely destroying a complete range of aquacultural and fish Farm waste. Designed and built along the latest advances in marine incineration. Having a multi layered brick based refractory achieving a 40% reduction in fuel consumption compared to alternative solutions. Top loading with reinforced concrete for hard wearing easy operation. DEFRA approved and compliant with EU Animal By Products Regulations. 500kg loading capacity. Not all incinerators are suitable for aquacultural waste, which is why our machines have been optimised to effectively handle your waste requirements completely. Machine Specification Weight (approx tonnes) Nominal Burn Rate UK* (kg/hr) Burn Rate [Export Only]* (kg/hr) Power Supply 50/60 hz (three phase) Door Aperture Control Panel Fuel Types Insulation Board Insulation Fire Brick Fire Brick (Alumina) *We reserve the right to change the specification, dimensions and quality of materials from time to time, so long as the alteration is minor or an improvement to the said product. addF eld Incinerate Cremate Primary Chamber • Pre-cast block impact zone protecting refractory lining during loading. • Heavily insulated internal brick refractory, constructed along an interlocking systems to ensure maximum strength and resilience. • Premium grade high alumina content refractory brick work delivering optimal thermal retention. • Top loading counter balanced insulated access lid. • Temperature controlled waste ignition burner automatic on-off, complete with internal air fans. Secondary Chamber • Fully insulated internal refractory lining. Constructed from high grade low thermal mass insulation. • Temperature controlled Secondary chamber burnout burner with automatic on-off control, complete with internal air fans. • Integrated combustion burner air fans automatically controlling distribution to designated areas. • Temperature sensor mounting point at the top of the chamber, ensuring the chamber reaches the required 850°C minimum, with a 2 second retention time. 220 - 250v (single phase 110-120v on request) Addfield Environmental Systems Limited Unit 9l|iZone 4l|lBurntwood Business Park Staffordshire! | |WS7 3XDl | lUnited Kingdom © Addfield Environmental Systems Ltd. All information should be used as a guide only, specifications are subject to change without notice.

THUNDER 500 Waste Loading and De-Ashing The aquacultural range of incinerators are designed for top loading directly into the primary chamber. Loading can be manual or mechanically through digger or hydraulic bin tipper. To be loaded no more than once per day prior to operation. The incineration process will reduce the waste to approximately 3% volume, ash. The ash should be removed before the following waste is loaded to ensure optimum burn rates. Optimised for high moisture waste Optional de-ashing doors are available. The Addfield Difference • Pre-Fabricated 8mm & 10mm robust mild steel casing,...

5000.61 Kg THIRD ANGLE PROJECTION (UNLESS STATED OTHERWISE) TOLERANCES UNLESS OTHERWISE STATED FABRICATION CHECKED APPROVED CHECKED APPROVED CHECKED APPROVED CHECKED APPROVED CHECKED APPROVED Addfield Environmental Systems LTD Unit 9, Zone 4 Burntwood Business Park Staffordshire WS7 3XD Addfield Environmental Systems LTD This drawing and any information or descriptive material set out on it are the confidential and copyright propertyof Addfield Enviromental Systems, and MUST NOT BE DISCLOSED, COPIED, LOANED in whole or part or used for any purpose without the written permission of Addfield Enviromental...