Addfield MP500 Medical Waste Incinerator Datasheet
3Pages

{{requestButtons}}

Catalog excerpts

Addfield MP500 Medical Waste Incinerator Datasheet - 1

The MP Range is purpose built for clean efficient waste destruction. The MP range is specially designed for safely incinerating hazardous high moisture biological red bag waste. Primary Chamber QUALITY ASSURED FIRM QUALITY ASSURED FIRM The MP-500 is the largest of the MP range of medical waste incinerators. Securely destroying a complete range of Medical, Pathological and Clinical waste. Designed and built along the latest advances in medical incineration. Benefiting from Hot Hearth technology, efficiently recycling heath throughout and below the primary chamber, delivering complete 360° heating. Unrivalled in it’s field boasting a 40% reduction in fuel consumption compared to alternative solutions. The MP-500 is ideally suited for facilities of between 6251000 beds and equivalent. Machine Specification External L x W x H (mm) Weight (approx tonnes) Nominal Burn Rate (kg/hr) Power Supply 50/60 hz Thermal Capacity (kW) Door Aperture Hot Hearth Principle Fuel Types Control Panel Insulation Board • Heavily insulated internal refractory lining. Constructed from high grade refractory brick ensuring a secure self supporting, interlocking arrangement. • Manually opening, securely locking, access door with viewing port. • Automatic temperature controlled on-off waste ignition burner complete with internal air fans. • Hot Hearth Combustion Burner, temperature controlled on-off, complete with internal air fans. • Secondary combustion burner air fans, automatically controlled distribution to their designated area. • Two temperature sensor mounting points. Secondary Chamber • Fully insulated internal refractory lining. Constructed from high grade refractory brick and low thermal mass insulation. • Secondary chamber burnout burner, temperature controlled on-off complete with internal air fans • Automatically controlled integrated combustion burner air fans. • Temperature sensor mounting point at the base of the exit flue ensuring the chamber reaches the necessary 1100°C minimum, with a 2 second retention time. Waste Type 390 675 x 550 Double Pass Diesel, LPG, N-Gas AIC or PLC Grade E23 Fire Brick (Alumina) Treated Waste Anatomical Waste Insulation Fire Brick Clinical Waste Cytotoxic & Cytostatic Waste Offensive/Hygiene Waste *We reserve the right to change the specification, dimensions and quality of materials from time to time, so long as the alteration is minor or an improvement to the said product. Medicinal Waste Domestic (municipal) Waste Addfield Environmental Systems Limited Unit 9 | Zone 4 | Burntwood Business Park Staffordshire | WS7 3XD | United Kingdom © Addfield Environmental Systems Ltd. All information should be used as a guide only, specifications are subject to change without notice.

Open the catalog to page 1
Addfield MP500 Medical Waste Incinerator Datasheet - 2

The MP Range is purpose built for clean efficient waste destruction. Waste Loading and De-Ashing The MP series of incinerators are ergonomically designed For easy and saFe loading oF all medical waste streams. Loading through the Front Facing door can be completed manually or with the aid oF a hydraulic liFting table. The MP machines can be loaded multiple times throughout a cycle. At the end oF every incineration process, ash should be discharged through the loading door onto the supplied catcher tray prior to being loaded For the next burn. The Addfield Difference • Pre-Fabricated 8mm &...

Open the catalog to page 2
Addfield MP500 Medical Waste Incinerator Datasheet - 3

CHECKED APPROVED CHECKED APPROVED SIDE VIEW DORR OPEN PLAN VIEW CHECKED APPROVED 3825 CHECKED APPROVED COMMENTS FIRST ISSUE CHECKED APPROVED HB COMMENTS FRONT VIEW ISOMETRIC VIEW This drawing and any information or descriptive material set out on it are the confidential and copyright propertyof Addfield Enviromental Systems, and MUST NOT BEDISCLOSED, COPIED, LOANED in whole or part or used for any purpose without the written permission of Addfield Enviromental Systems. Addfield Environmental Systems LTD (2018) DATE CREATED: Addfield Environmental Systems LTD Unit 9, Zone 4 Burntwood...

Open the catalog to page 3

All Addfield Environmental Systems catalogs and technical brochures

  1. A50-IC (1)

    3 Pages

  2. MINI AB

    3 Pages

  3. A50L

    3 Pages

  4. TB

    3 Pages

  5. N20-AA

    5 Pages

  6. N20

    5 Pages

  7. PHOENIX 3

    5 Pages

  8. PHOENIX 2

    5 Pages

  9. PHOENIX 1

    5 Pages

  10. N20-SA

    5 Pages