N20-SA
5Pages

Catalog excerpts

‘The most thermally efficient, robust and reliable human cremators on the market Simply Built Better!’ Human Cremator Suitable for up to 260 cremations a year The N20-SA is our entry level human cremation unit. It benefits from 115mm refractory wall thickness and temperature controlled burners that ensure it has the lowest fuel consumption possible. Complete with a curved hot hearth design that contains and destroys high moisture content material . The machine utilises a fully automatic control sequence removes the possibility of human error. It utilises a front loading door design for ease use and easy cleaning. The main chamber has a volume of 1.784m ³ and the machines maximum weight capacity is 181kg. Control Panel Addfield Environmental Systems Limited Hollies Park | Cannock | Staffordshire | WS11 1DB www.addfield.co.uk | sales@addfield.co.uk | 01543 571280 All information should be used as a guide only, specifications are subject to change without notice.

Open the catalog to page 1

Human Cremator Suitable for up to 260 cremations a year The human cremation range is designed as a two stage cremation unit comprising of a primary loading chamber that incorporates a hot hearth construction for the total destruction of the solid/liquid wastes. The unit is further complemented by an integral after burner system; this afterburner draws the hot gases from the primary chamber under the hearth through an integral refractory brick system. This ensures maximum gas turbulence/mixing is achieved thus aiding clean combusted gases. All gases then reside inside the after burner...

Open the catalog to page 2

Human Cremator Suitable for up to 260 cremations a year General Construction • Pre-fabricated from robust mild steel box tubing, with a thickness of 3.5mm externally and 2.7mm internally. Suitably stiened and braced where necessary so as to be self-supporting throughout. • Paint finishing - The steel structures are completely painted using a high grade paint system. The standard colour of the series is grey for the stack, primary and secondary chambers. The front loading door comes in black. • The Primary and secondary chamber are lined with thickness of 115mm, refractory insulation that is...

Open the catalog to page 3

Human Cremator Suitable for up to 260 cremations a year Touch Screen Intelligent Controller *optional extra on the N20-SA Series • Data logging of deceased. • Internet connectivity ideal for remote troubleshooting. • Incoming and outgoing cable terminations. • Burner control gear. • Interface relays and contactors. • Temperature indication and control of the primary chamber. • Temperature indication and control of the secondary chamber. • Plant status indicators. • Cycle status indicators. • Fault status indicators. • Touch screen operator interface. Waste Loading and De-Ashing The human...

Open the catalog to page 4

MP-100 INCINERATOR N20-SA Human Cremator FRONT ELEVATION SIDE ELEVATION Temperature recorder Control panel Observation hole Autoloading door REAR ELEVATION FLOOR PLAN 150mm concrete base Incinerate - Cremate Addfield Environmental Systems Ltd Unit 17 Hollies Park Cannock Staffordshire WS11 1DP Access panel GENERAL ARRANGEMENT OF N20-SA CREMATOR scale:- Not to scale drawn:- All information should be used as a guide only, specifications are subject to change without notice.

Open the catalog to page 5

N20-SA 5Pages

Catalog excerpts

All Addfield Environmental Systems catalogs and technical brochures

N20-SA
5Pages