DENTAL IMPLANT SYSTEMS LTD Trans Mucosal Abutment System

About ADIN Adin Dental Implant Systems Ltd., designs, manufactures and markets state of the art, technologically advanced dental implant solutions. For more than 20 years, Adin has provided dentists and dental technicians with innovative solutions and advanced knowledge into the field of implant dentistry. The Adin plant and headquarters is located in northern Israel and employs highly skilled staff each of whom play a significant role in Adin’s growing success. Adin highly values each hard working employee and attributes its growing success to their continuous dedication. Over the years, Adin...

Trans Mucosal Abutments System Multi-Unit Angled and Straight Abutment System for Screw Retained Restoration. Adin’s Trans Mucosal Abutment System (TMA ) is indicated for multiple-unit, screw-retained restorations, and may be used in combination with an implant level framework design. TM The system is used to elevate seating platform of restoration when restoration at implant level is not indicated or practical due to the depth or angle of the implant. The Trans Mucosal Abutment System is designed to allow better prosthetics access when using diverging angled implants to accommodate full and...

Abutment Connection for Angled 17° and 30° TMA™ 1. The abutment is placed over the implant by using the pre-mounted abutment holder. Please note that there are six possible positions that can be used to place the abutment. The use of TMA™ angled Abutments is recommended for use when an implant angle correction is needed. The maximum recomended angle of a tilted implant restored with the TMA™ system is 30°. Unscrew the holder half a turn counter clockwise. Abutment Level Impression 1. Connect the impression coping to the abutment. Inject the impression material and record the impression. After...

Laboratory Procedures In the laboratory, a model is made and a restoration is produced: Connection of Final Restoration As se mble the impre s sion coping and TMA™ replica and position into impression. Verify the abutment retaining screw tightness of 35 Ncm. For final restoration use the RS5001-Plastic Casting Sleeve; Evaluate full seating of the restoration on the model and intra-orally. Connect the restoration to the abutments with prosthetic screws. Start with tightening the mid region post and continue to tighten the other screws, alternating sides from left to right. Fabricate a working...

Trans Mucosal Abutment Product Assortments (The full components list can be found in Adin's Product Catalog) Touareg CloseFit™ - NP 3mmD (Narrow Platform) NP0032 NPStraignt Trans Mucosal Abutment 1mm Ti Grade 5 NP0033 NPStraignt Trans Mucosal Abutment 2mm Ti Grade 5 NP0034 NPStraignt Trans Mucosal Abutment 3mm Ti Grade 5 NP3729 NPStraignt Trans Mucosal Abutment 4mm Ti Grade 5 NP3730 NPStraignt Trans Mucosal Abutment 5mm Ti Grade 5 NP0035 NP Angled Trans Mucosal Abutment 17° 3mmL Ti Grade 5 NP0038 NP Angled Trans Mucosal Abutment 17° 4mmL Ti Grade 5 NP0036 NP Angled Trans Mucosal Abutment 30°...

Standard Internal Hex Connection - RS Accessories & Tools RS3731 RS Straight Trans Mucosal Abutment 1mm TiGvrade5 RS3732 RS Straight Trans Mucosal Abutment 2mm Ti Grade 5 RS3733 RS Straight Trans Mucosal Abutment 3mm Ti Grade 5 RS3729 RS Straight Trans Mucosal Abutment 4mm Ti Grade 5 RS3730 RS Straight Trans Mucosal Abutment 5mm Ti Grade 5 RS3734 RS Angled Trans Mucosal Abutment 17° 2mm Ti Grade 5 RS3737 RS Angled Trans Mucosal Abutment 17° 3mm Ti Grade 5 RS3735 RS Angled Trans Mucosal Abutment 30° 3mm Ti Grade 5 RS3738 RS Angled Trans Mucosal Abutment 30° 4mm Ti Grade 5 RS4900 TMA Titanium Temporary...

ADIN products comply with the standards set by the FDA and other regulatory agencies. All ADIN products are CE-marked in accordance with the Council Directive 93/42/EEC and Amendment 2007/47/EC. ADIN complies with ISO13485:2012 and the Canadian Medical Devices Conformity Assessment System (CMDCAS). Product availability may vary between countries. For more information, please contact your local ADIN office. Industrial Park Allon Tavor, POB 1128, Afula 1811101, Israel | T. +972-4-6426732 | [email protected]