Integrated ultrapure (Grade 1) water and RO water system Q-Front

Product catalog summary

Overview: This document is a data sheet for the Q-Front integrated ultrapure (Grade 1) water and RO water system, detailing specifications for various models including QF-3101, QF-3201, QF-3103, QF-3203, QF-3105, and QF-3205.

Specifications:

Nominal Flow: Models offer nominal flow rates of 5 l/h or 10 l/h for RO water to the storage tank.
Water Quality: Grade 1 water resistivity is 18.2 MW x cm at 25°C, with a conductivity of 0.055 µS/cm.
Contaminant Rejection: TDS rejection rate is ≥97%, with TOC levels <10 ppb or <5 ppb under specific conditions.
Biological Contaminants: Rnase and Dnase levels are <1 pg/mL and <5 pg/mL respectively for certain models. Bacteria levels are <0.01 CFU/mL, endotoxins <0.15 EU/mL, and particles >0.22 μm are <1 per mL.
Dispense Rate: Ultrapure water dispense rate is <1.5 L/min.
Display and Controls: Features a colour LCD display and side-mounted dispenser. TOC monitor is included in some models.
Environmental Conditions: Operates within a temperature range of 15–30°C and relative humidity of 20–80%.
Power Requirements: Requires 200–240 VAC, with a power consumption of 130 W and a fuse rating of 230 V, 3.15 A.
Dimensions and Weight: Dimensions are 35*39*54 cm. System weight ranges from 25 kg to 27 kg, with operating weight from 28 kg to 30 kg.

Feedwater Requirements:

Type: Potable tap water.
Pressure: 0.4–6.0 bar.
Conductivity: <2000 µS/cm.
Temperature: 5–35°C.
pH: 4–10.
Fouling Index: <10.
Contaminants: Iron <0.1 ppm, Aluminium <0.05 ppm, Manganese <0.05 ppm, Total chlorine <1 ppm, Langelier Saturation Index <+0.2, TOC <2000 ppb.

Catalog excerpts

Integrated ultrapure (Grade 1) water and RO water system Q-Front-1

LABORATORY SYSTEMS Integrated ultrapure (Grade 1) water and RO water system Q-Front ADRONASIA Kalnciema st. 209 Riga, LV-1046, LATVIA Phone: +371 67551894 Fax: +371 67551976 [email protected] www.adrona.eu

Open the catalog to page 1