Infant Transport Device

Infant Transport Device Transporting newborn infants requires an environment that will keep them safe and warm. Until now, the only way to guarantee this has been to use a heavy, cumbersome, and physically large transport incubator. These expensive devices require an electrical supply to function and are not readily available as they require additional equipment and dedicated vehicles. Enhanced safety features When infants are transported they have to be placed in their mothers arms! These infants run the risk of heat-loss and injury should the transporting vehicle be involved in an accident,...

Patient safety within the The Baby Pod II is designed with the safety of the infant in mind The hi-tech carbon-bre construction of the Baby Pod II has undergone crash testing to comply with 10g European Ambulance Standard (CEN 1789) requirements. The Baby Pod II has been tested with an acceleration of 10g in all directions representing a crash at 55 kilometers per hour (30 mph). It is the only transport incubator, world-wide, which has been tested and approved according CEN 1789. Inside the Baby Pod II, the infant is comfortably secured in position by a vacuum mattress and soft infant positioning...

Ventilation and warmth within the TransWarmer® Infant Transport Mattress Thanks to the TransWarmer® Infant Transport Mattress, no electrically powered source of warmth is required to use the Baby Pod II for transport! Heated by a single-use exothermic reaction within a non-toxic gel, the TransWarmer® Infant Transport Mattress will keep an infant warm during transport in the pod. 60 seconds after activation, the TransWarmer® Mattress will reach a consistent temperature across its surface of 38˚C (100˚F), and maintain temperature for up to 2 hours. Even outside of the Baby Pod II, the TransWarmer®...

Patient Visibility and Access The Baby Pod II has a transparent lid allowing excellent visibility of the infant. The lid is securely closed at both the ‘Head’ and the ‘Foot’ end of the Baby Pod II with an easy access turn knob. Once released, the lid opens fully to allow the patient to be placed into or removed from the unit, or attended to when necessary. Direct access to the infant is allowed by any of 4 access ports—two on either side of the lid. Access for ventilator, syringe tubing or wires is provided through xed openings in the lid—two on each end. For more information on our products,...

Additional Accessories Transwarmer Mattress (Box of 6) Infant Positioning Strap Set Vacuum Mattress Pump ‘BabyPac’ Ventilator Mounting Bracket TransWarmer® Infant Transport Mattress Technical Information Infant Weight Limit 2-8kg (4.4-17.6lbs) Dimensions 1000mm x 430mm x 300mm (L x W x H) Weight 9.5 Kg (21Lbs) Materials Carbon/Composite Standard Compliance CEN 1789 BS EN ISO 9001/2000 BS EN ISO 9001/1994 For more information on our products, visit our website at: