BP37
BP37
The BP37™ Infant Temperature Maintenance Kit is designed to maintain a consistent surface temperature of 37°C for infants. It includes a Thermal Support Matrix that is easy to use and quickly warms up to provide a warm surface for the baby. The Matrix is secured with low tack adhesive tabs to prevent sliding during transport.
The BP37™ Controller displays surface temperature, ambient temperature, battery percentage, and time since activation. It can be attached to various mounts and runs on internal batteries for up to 6 hours, with a recharge time of approximately 3 hours. The Controller can be switched to standby mode to conserve battery life.
- Dimensions: 125 x 115 x 95mm
- Weight: 610g (1.3lbs)
- Materials: PA66 body, Stalinate screen, PVC cable, PA66 clamp
- Matrix Materials: Non-woven Spun bond PP, Acrylic solvent adhesive, Polyester backing, Aluminium printed circuit
The product is CE Mark Class I and FDA Device Class 2 compliant.
- BP37-001: Starter Pack with Controller, Charger, Power Cord, TSMC, Fitting Kit, and Matrix (Pack of 10)
- BP37-001-LS: Starter Pack LS Variant with additional Rail Clamp and Cable Guide
- BP37-002: Controller with Charger, Power Cord, TSMC, and Fitting Kit
- BP37-002-LS: Controller LS Variant with additional Rail Clamp and Cable Guide
- BP37-003: Battery Charger
- BP37-004 to BP37-007: Power Cords for UK, EU, USA, AU
- BP37-008: Thermal Support Matrix (Pack of 10)
- BP37-009: Thermal Support Matrix Cable & Clamp
- BP37-010: Fitting Kit for AHT Infant Transport Devices
- BP37-014: Rail Clamp (LS Variant)
- BP37-015: Cable Guide (LS Variant)
- BP37-018: Universal Clamp
The product is distributed by Advanced Healthcare Technology Ltd. Various trademarks are associated with the product, including TransWarmer®, Formula 1®, Baby Pod®, BabyPod 2™, and BP37™.
Catalog excerpts
BP37™ Infant Temperature Maintenance Kit is designed to provide a consistent and uniform surface temperature of 37°C for the infant to lie on moments after switching it on. Simple to use, the single use Thermal Support Matrix is easily pushed into the Clamp (TSMC) and the Controller is turned on. Pre-set to 37°C, the Matrix will warm up in seconds to allow the baby to be placed directly onto a warm surface to help them maintain their temperature. Low tack adhesive tabs are used to secure the Matrix to a mattress, ensuring that it will not slide when the baby is placed on it during transport. The lightweight BP37™ Controller clearly displays actual surface temperature, ambient temperature, battery percentage and time since activation. It is supplied with a fixing kit to enable the Controller to be attached to AHT Baby Pod® range, optional clamps allow the Controller to be mounted onto a Medi-Rail or a standard Pole. Running from internal batteries for up to 6 hours, it can be fully recharged in approximately 3 hours, allowing flexibility to be used away from mains electricity for prolonged periods. When thermal support is not needed, the Controller can be switched to standby mode to preserve the battery. Technical Details
Open the catalog to page 1
Ordering Information Product Description Accessories & Spares fiHT ADVANCED TransWarmer® is a Registered Trademark of Cooper Surgical inc. Formula 1 is a Registered Trademark of Formula One Licencing B.V. Baby Pod® are Registered Trademarks of AHTLtd. BabyPod 2™ & BP37™ are Trademarks of AHT Ltd. BabyPod 2 is a patented product. BabyPod 2 Product Info vl • 01/26
Open the catalog to page 2All Advanced Healthcare Technology catalogs and technical brochures
ScanPod2 Pages
BabyPod 202 Pages
BabyPod 22 Pages
NeoPod2 Pages
Scan Pod6 Pages
Archived catalogs
BabyPod 204 Pages
Baby Pod II6 Pages
NeoPod1 Page
BP37™1 Page