Neonate Imaging Environment

Neonate Imaging Environment MR imaging today is an increasingly important diagnosis tool for neonatal infants. Its non-invasive nature is especially important considering the size and nature of the patients requiring treatment, and early diagnosis critical to direct treatment eciently and at the earliest opportunity. Typically, transporting an infant patient from the NICU to the MR unit for imaging provides several logistical challenges to the team caring for and imaging the patient. There may not always be an MR unit close to the NICU. A full MRI compatible transport incubator is expensive,...

Patient comfort within the The Scan Pod is designed with the comfort of the infant in mind The hi-tech composite construction of the Scan Pod has been designed to be both lightweight and shock absorbing, yet contributing no interference or artefacting to MR, CT or X-Ray imaging. Using similar technologies implemented in our groundbreaking Baby Pod II Infant Transport Device, patient safety and comfort are treated with paramount importance. The “head” end of the unit incorporates a section of acoustic damping foam inside the construction of the shell itself to reduce noise and vibration from the...

Ventilation and warmth within the TransWarmer® Infant Transport Mattress Thanks to the TransWarmer® Infant Transport Mattress, no electrically powered source of warmth is required to use the Scan Pod for transport through the hospital, nor in the MRI. The ceramic coating on the snap-disc used to activate the mattress makes the TransWarmer Mattress safe for use during imaging. Heated by a single-use exothermic reaction within a non-toxic gel, the TransWarmer Infant Transport Mattress will keep an infant warm during transport in the pod. 60 seconds after activation, the TransWarmer Mattress will...

High-Visibility Scan Pod Lid Patient Access Port Patient Access Port Patient Access Port MRI Coil Lead Exit Port MRI Coil Mounted Inside Pod Environment Ventilator Tubing Access Port Scan Pod Mounting and Carry Board Ventilator Mounting Point Patient Visibility and Access The Scan Pod’s large transparent lid section gives excellent visibility of the infant. The lid is mounted and held in place by easy-secure, easy-release toggles on either side of the unit. The entire lid section is removed for initial positioning of the patient in the Scan Pod and lightweight and easy to remove for further access...

Additional Accessories Transwarmer Mattress (Box of 6) Infant Positioning Strap Set Vacuum Mattress Pump Alternative Ventilator Mounting Plate TransWarmer® Infant Transport Mattress Technical Information Infant Weight Limit Up to 8kg (17.6lbs) MR-Neonatal Automatic Transport Ventilator Dimensions 1400mm x 430mm x 380mm (L x W x H) Weight 15 Kg (33lbs) Materials Composite Standard Compliance CEN 1789 BS EN ISO 9001/2000 BS EN ISO 9001/1994 For more information on our products, visit our website at: