LabTec? Smart Dispensing System
6Pages

Smart Dispensing Systems • LabTec™ dispenses by volume, weight or weight ratio (dilution by weight) • Improves the speed, precision and accuracy of the entire sample preparation process • time-consuming autoclaving of diluent • Controlled solvent delivery system enhances employees’ safety • Automatically provides critical GLP documentation LabTec™ models available for organic solvent dispensing

intelligent dispensing systems Intelligent Dispensing Systems The LabTec™ automates, optimizes and documents repetitive liquid dispensing with or without in-line filter sterilization. The LabTec CP models are Ideally suited for dispensing sterile solutions in Media Kitchens and Microbiology Laboratories. Also widely used in small production runs to fill your final product into vials, bottles, bags, containers. Disposable Pressure Sensor (optional) Alarms when filter needs to be replaced Membrane Keyboard Easy control and automation of your procedure. Intuitive user interface and set-up....

intelligentdispensing systems LabTec™ Applications 1. Automated Weighing & Dilution of Food Samples With In-Line Media Sterilization The LabTec™ significantly increases the productivity of any Microbiology Laboratory. The dispensing system automates weighing and diluting of food samples in preparation for bacteriological analysis. Only an approximate sample size is needed. The LabTec™ dispenser calculates and rapidly dispenses the media required to achieve a user- selected dilution factor. LabTec Performance Data: Automated Weighing and Dilution of Food Samples Diluent Weight Diluent Weight...

intelligent dispensing systems 3. Organic Solvent Dispensing: Preparation of HPLC Mobile Phase and Extraction Solvents Biopharmaceutical GMP Filling Application: High Accuracy Dispensing with In-Line Filter Sterilization MAGNETIC GEAR PUMP In this configuration, the LabTec solvent delivery system is a walk- up dispensing station. The user selects the solvent volume then presses a front panel key or foot switch to initiate the dispensing cycle. The LabTec provides high precision, high accuracy dispensing from The LabTec automates the safe and accurate dispensing of solvents typically...

S p e c i fi c a t i o n s Width: 5.75 in (14.6cm); Height: 8.5 in (212.6); Depth: 11in 16 Ga, aluminum bak ed epoxy blue. LabTec™ Models: LabTec CP-120 Optimal range for precision and speed of dispensing 0.2 ml to 50 ml aliquots of low vis cosi ty, aqueous liquids. Typical precision 0.5% by vo l. Tandem 1081 peri staltic pump head with variable speed max. 160 RPM moto r. 10 ml to 2 liter aliquots of low or high vis cosi ty liquids. Typical precision 0.5% by vol. Use with any thick, vis cous liquids. Tandem 1082 peristaltic pump head with variable speed max. 600 RPM moto r. Tandem 1081 uses...

• High precision. • Real-time data collection and graphing. • User-friendly. • Safe, walk-away system operation. • Each one optimizes a particular type of application. • Built-in alarms and multiple I/O ports for interfacing with other devices, e.g. pressure sensors, balances, valves, printers, PCs, etc. Performance validations available for all SciLog SciLog® Intelligent Lab Systems FilterTec™ Dead End Filtration (DEF) System LabTec™ Smart Dispenser System • Filterability Studies and Vmax Determination • SciDoc, Real-Time Data Collection of 15 Filtration Parameters and Graphing • Increased...