ReCon Water Heater
1 / 3Pages

RECON SERIES TECHNICAL DATA SHEET ReCon 1000 Commercial Water Heating System The AERCO ReCon Water Heater has been specifically developed as a KC1000 water heater replacement. Its footprint and size/layout for gas/water piping and ductwork will significantly reduce KC1000 replacement installation time. The ReCon utilizes state-of-the-art technology to easily meet highly diverse, demanding commercial and industrial hot water requirements in a compact and reliable condensing design. The durable high efficiency helical firetube heat exchanger is time tested to be impervious to thermal stress for an extended life. The all stainless steel construction maximizes longevity in the condensing application and the corrugated tubes increase effective heat transfer surface area for optimal thermal efficiencies up to 99%. Enhanced waterside flow distribution maintains constant minimum velocities across the heat exchanger; this keeps solids in suspension and greatly reduces scale dropout to maintain high efficiency performance and long life. The advanced control system of the ReCon incorporates dynamic feedforward sensing for precise modulation of its turndown air/fuel delivery system. These controls fire the unit to accurately match load requirements and produce tight hot water outlet temperature control. Wasteful overshooting and cycling are virtually eliminated as is the need for storage tanks, mixing valves and other temperature averaging components in most applications. The set point is adjustable from 50°F to 190°F and control to +/- 4°F is easily achieved. Sidewall, through–the–roof, and sealed combustion capabilities provide broad installation flexibility. LOW LEAD COMPLIANT ANSI/NSF 372 The small footprint, doorway size, and quiet operation make it ideal for retrofit. In addition to the above-added features over KC1000 system, the ReCon unit also incorporates the feedback received from service technicians and end users to provide a desired replacement unit. With its tight temperature control, high efficiency, reliability and longevity the AERCO ReCon is truly unique and advanced design. Drop-in KC-1000 Replacement Precise Temperature Control +/- 4°F Fully Modulating Condensing Design Stainless Steel Heat Exchanger Compact, Space Efficient Design Natural Gas Outlet Water Temperature of 50° to 190°F UL, CUL Listed for Closet Installation on Combustible Flooring

RECOVERY CAPACITY* *ln condensing mode <2000 ft. above sea level DIMENSIONS (INCHES) CC.'JMU .ICA.-IOI. PORT RELIEF VALVE WATER OUTLET WATER INLET

SPECIFICATIONS ReCon 1000 Adjustable Temperature Control Ambient Temperature Turndown Ratio Flue Material (per local code) Water Inlet & Outlet 4” WC minimum @ full load to 14” WC @ static load Maximum Continuous Water Flow Condensate Connection Maximum Condensate Flow Pressure Rating Standard Listing & Approvals FM Compliant or Factory Installed, Future - Double Block and Bleed Electrical Requirements Water Pressure Drop @ 15 gpm Water Pressure Drop @ 30 gpm Water Volume Weight Shipping (estimate) AERCO International, Inc. 100 Oritani Drive Blauvelt, NY 10913 P 845.580.8000 F 845.580.8090...