SA1500/SA1500
6Pages

Filtering half mask to protect against particles - FFP2 NR SA1500 Made for comfort and protection 4 ply, 3 components Outer Layer Spundbond Product Specifications: Inner layer Second First stage stage filter Spundbond filter Hot air cotton Meltblown Manufacturer’s information Aerem Industry Company Limited Filtration capacity Workshop No.54, Road 1-7, Long thanh IZ, Long Thanh District, Dong Nai Province, Vietnam Item Weight Hot air cotton + meltblown + Spundbond Number layers Nose clip Exhalation Valve Item Number Packaging format Notified Body for production control - module B/C2 Name CS60193 – 13322 Marseille Cedex 16 – France Identification number You can check the EU declaration on conformity at: https://www.efasprotect.com/masks/ The product describe is in conformity with provisions of the Regulation 2016/425 of the Europea

Filtering half mask to protect against particles - FFP2 NR SA1500 Instructions for use: Do not remove the mask from its packaging until you are ready to use it. Before use, check its integrity as well as that of the earloops. Use restrictions: • This mask does not provide any protection against gases or fumes. • Do not use this mask if the atmospheric pollutant concentration exceeds 9 times its VLE (exposure limit value). • This half mask does not supply any oxygen. Do not use in atmospheres which do not contain at least 17% oxygen. • Do not use in an explosive atmosphere. • Before use,...

Filtering half mask to protect against particles - FFP2 NR SA1510 Made for comfort and protection 4 ply, 3 components Outer Layer Spundbond Product Specifications: Inner layer Second First stage stage filter Spundbond filter Hot air cotton Meltblown Manufacturer’s information Aerem Industry Company Limited Filtration capacity Workshop No.54, Road 1-7, Long thanh IZ, Long Thanh District, Dong Nai Province, Vietnam Item Weight Hot air cotton + meltblown + Spundbond Number layers Nose clip Exhalation Valve Item Number Packaging format Notified Body for production control - module B/C2 Name...

Filtering half mask to protect against particles - FFP2 NR SA1510 Instructions for use: Do not remove the mask from its packaging until you are ready to use it. Before use, check its integrity as well as that of the earloops. Use restrictions: • This mask does not provide any protection against gases or fumes. • Do not use this mask if the atmospheric pollutant concentration exceeds 9 times its VLE (exposure limit value). • This half mask does not supply any oxygen. Do not use in atmospheres which do not contain at least 17% oxygen. • Do not use in an explosive atmosphere. • Before use,...

Safety Data Sheet Product and company identification Product Name: Disposable Mask Product Codes: SA1500-SA1510 General Use: Personal Protective Equipment Recommend use: Respiratory Protection Manufacturer: AEREM INDUSTRY Co.,LTD, Workshop No.54, Road 1-7, Long Thanh IZ, Tam An Commune, Long Thanh District, Dong Nai Province, Vietnam Phone: +84 0251 32 66 88 Hazards identification Thermoplastic Elastomer Nose Strip Plastic Adhesive Film Polyurethane Foam Emergency Overview: None Potential Health Effects: None Routes of Exposure: None Skin: None Inhalation: None Ingestion: None Chronic...

Safety Data Sheet Physical and chemical properties Physical State: Solid Specific Gravity: Non-woven material Appearance: White, non-woven respirator shell Odor: Odorless Threshold (ppm): Not available Boiling/Freezing Point: Not available pH/Viscosity: Not available Evaporation Rate: Not available Vapor Pressure/Density: Not available Solubility in water: Not available Coefficient of Water/ Oil Distribution: Not available VOC content: None Stability: Conditions of Reactivity: Incompatible materials: Hazardous decomposition or by-products: Possibility of Hazardous Reactions: Toxicology...