Ventilated Specimen Table With Sink Website: www.afosgroup.com / Email: [email protected] Why AFOS AFOS have a global reputation for the design and manufacture of high quality stainless steel medical equipment. AFOS specialise in providing a total design, manufacture and installation service of mortuary and pathology equipment including autopsy tables and body storage. AFOS have successfully provided solutions for global healthcare and are active in realising PFI opportunities throughout the UK. AFOS not only meet existing health and safety standards, we exceed them thus maintaining maximum protection for the clinician. The innovative AFOS down draught technology helps eliminate odours and controls harmful pathogens, ensuring the highest possible level of clinical effectiveness is achieved. Overview Fitted Sink Manufactured from high quality stainless steel with 316 grade stainless steel as standard Adjustable feet for final site levelling Free standing unit All outside surfaces cleaned and polished to DP1 finish Top of VST is designed to form a fully welded sump VST1 version shown - other versions and configurations available Ventilation Perforated work top located above sump Worktop manufactured in sections for ease of removal Sump irrigation system. Ventilation by means of raised duct within the sump, protected by removable cowl Extract duct can be either rear take-off or side take-off, to accommodate site conditions Standard Fittings Include: Hot and cold mixer shower tap Cold water wrist action tap Cold water sump irrigation system Set of fine perforated worktops Easily removable front and side panels as required Optional Extras Include Sink with integral Sluice Macerator Formalin tap Extract duct manifold Complete extract air system Tundish Electronic Height Adjustment Canopy Available in right hand, left hand or central sink versions Solid dissection tray with peripheral ventilation to replace fully perforated worktop Peninsular style frame Storage cupboards beneath worktop Fan Starter alarm and/or warning system Re-circulating air filter system AFOS Limited, Unit 3, Wiltshire House, Wiltshire Road, Hull, East Yorkshire, HU4 6PA. Phone: +44 (0) 1482 372100 Fax: +44 (0) 1482 372150

Ventilated Specimen Table With Sink Material Specification Table Dimensions Length: 1200mm/1500mm/1800mm/2100mm/2400mm* Width: 750mm* Height: 1000mm/900mm* *These dimensions apply to the AFOS standard range, if a variation of this is required, please contact AFOS for further information. Framework 20/25mm Stainless square hollow section, welded and polished 304 stainless steel Plenum / Sump 1.5mm (16SWG) thick stainless welded and polished 316 stainless steel Sink 0.9mm-1.5mm thick dependant on sink size Coarse Worktop 1.5mm (16SWG) thick stainless welded and polished 316 stainless steel Fine...