Minilight
1 / 13Pages

Minilight Installation and use manual

Via Torino, 3 20030 Senago (MI) Italy www.luzzani.eu E-mail: info@luzzani.com Tel.: +39 029988433 Fax: +39 0299010379 ED. 5 REV. 0

GENERAL GENERAL CHARACTERISTICS MODELS CONTROLS CE MARKING 12 — FAULT REPORT FORM 13 — SYMBOLS 14 — WIRING DIAGRAM 3 — IDENTIFICATION DATA AND WARRANTY 3.1 — MANUFACTURING BATCH 3.2 — WARRANTY 4 — PACKAGING 5 — TECHNICAL CHARACTERISTICS 5.1 — OPERATING CONDITIONS 5.2 — TRANSPORT AND STORAGE CONDITIONS 6 — INSTALLATION AND CONNECTIONS 6.1 — CONNECTION TO ELECTRICAL SYSTEM 6.2 — CONNECTION TO HYDRAULIC SYSTEM 6.3 — CONNECTION TO COMPRESSED AIR SYSTEM 6.4 — CONNECTION OF STRESS ABSORBER CORD 6.5 — NOTES FOR CORRECT CONNECTION 7 — NORMAL USE 7.1 — INSUFFLATION OF COLD WATER 7.2 — INSUFFLATION...

Tip retainer Water button Selector switch Water line Stress absorber cord

1 —— WARNINGS 1.1 — Any unauthorised tampering, modification or improper use immediately terminates the warranty and exonerates our company from all liability for injury or damage to persons, animals or property that may be caused by such interference. 1.14 — Do not use the device in close contact with anaesthetic gases or in highly oxygenated environments (with an oxygen content >25%) or in areas where there is a risk of explosion. 1.15 — Do not perform any maintenance procedures not indicated in the manual. 1.2 — To ensure maximum user and patient safety, the transformer used must be...

This difference lets the dentist choose the tool ergonomically best suited for the purpose. To guarantee maximum hygiene and atoxicity, the handpieces are made of stainless steel. The devices are produced entirely in our workshop, with a tested, constantly updated work cycle using the most sophisticated machinery compliant with current quality system directives (UNI EN ISO 13485 certified). number of functions provided: • 6F: cold water/air/spray - warm water/air/spray G3F: cold water/air/spray (air and water inverted) G6F: warm water/air/spray (air and water inverted) A: cold water or air...

IMPORTANT NOTE: 5.2 — TRANSPORT AND STORAGE CONDITIONS With each syringe, the package also includes a User’s manual which also includes a “Fault Report Form”. Since this is required by law, the user must receive this User’s manual. Therefore, the syringe installer is responsible for delivering these forms to the dentist. Directive 93/42/EEC requires product traceability: therefore, our customers are asked to ensure that we can identify the end customer to whom the product has been sold. Relative Humidity Atmospheric Pressure 5 —— TECHNICAL CHARACTERISTICS FUNCTIONS Supply voltage Electrical...

unit. This cord is designed to absorb any strains, thus preventing abnormal traction on the electrical or air/water line connections. The manufacturer cannot be held liable for malfunctions caused by failure to anchor the stress absorber cord. 6.5 — NOTES FOR CORRECT CONNECTION • Before carrying out functional tests, both the electric, water and air lines must be correctly connected. Using the syringe without connecting the water and air supplies could damage the syringe. The lines must be connected carefully since inverting them could damage the syringe. and press the left button on the...

and press both buttons on the handpiece at the same time: Check the tip for any obstructions or deposits. Clean if necessary. Flush out the syringe at the beginning of each work day (minimum flushing time: 2 minutes) and before each patient (minimum flushing time: 20-30 sec.). Immediately upstream of the syringe, install filters able to retain the microorganisms coming from the hydropneumatic circuit. 7.7 — LIGHT FUNCTION (present in version L) This function is present in the Minilight L version. In this model, the handpiece has an optical fibre that conducts the light generated by a LED...

or remove the entire handpiece by pressing the button on the lower part of the handpiece and pulling upwards. 1. Not envisaged E — MANUAL DISINFECTION press the pawl to release the handpiece Disinfect only with a disposable cloth and the permitted disinfectant (following the instructions on the label and product technical data sheet). Recommended disinfectants: Incidin liquid F — AUTOMATIC DISINFECTION Not envisaged G — MANUAL DRYING Dry with disposable paper towelling. Dry with clean, dry, uncontaminated compressed air, inside and out, continuing until completely dry. Do not dry with hot...

10 —— DISPOSAL AND SCRAPPING The product does not contain dangerous or toxichazardous components. Separate waste collection is required for electrical equipment. Follow the regulations in force in your country. 11 —— INFORMATION FOR THE DENTIST The dental unit manufacturer is required to deliver the Luzzani Dental syringe User’s manual to the end user. 12 —— FAULT REPORT FORM To meet the requirements of Directive 93/42/CEE as amended, the company has established a post-marketing surveillance procedure to monitor any problems generated by the use of our products. This commitment includes the...

14 —— WIRING DIAGRAM 14.1 – VERSION 6F

FAULT REPORT FORM PRODUCT _______________________________________________________________________________________________________ TYPE _________________________________________________ BATCH ___________________________________________________ REPORTED BY ___________________________________________________________________________________________________ COMPANY ______________________________________________________________________________________________________ _________________________________________________________________________________________________________________...