Air-Products expanded their portfolio Model OX300 and OX300 plus. Flow Rate: 8,4 to 14 hm3/h Discharge Pressure: OX300 – 150 Bar / OX300 Plus – 200 Bar AIR-PRODUCTS OX300 – OX300 Plus are booster compressors specially designed for the recompression of clean and dry gases (Oxygen – Nitrogen – Argon – etc). These devices were equipped with dedicated engineering that gives them very high thermodynamic efficiency and long-term reliability. OX300 – OX300 Plus have been designed based on the requirements of the most prestigious PSA plant manufacturers worldwide. The capacity of this line covers the filling needs of 7.5 m3 tubes at 2200 psig (155 bar) and 2900 psig (205 bar) in a daily quantity of 25 to 47 cylinders. OX300 – OX300 Plus were conceived in a single-acting design, completely oil-free in 3 stages with an efficient intercooling and post-cooling system. The high balance of alternative masses, a high inertia flywheel, a regularity of movement free of vibrations, an efficient analysis of gas velocities through floating valves, safe values of compression temperatures due to high dissipative efficiency, low loss of load due to careful control of safe speeds throughout the circuit, extremely low dead spaces, all of the above and more in order to achieve a thermodynamic efficiency of 0.8 Innovators in Environmental Technologies AIR-PRODUCTS SRL Quality Made in Argentine www.airpr

Energy-saving piston compressors with long service lives S Oil Less design S Low RPM for long service life S Continuous operation S Compact design S Price - Performance S Compression ring PTFE S Maintenance free bearing S Solid design S Plug and play S Low noise level S Integrated star-up volume S Free oxygen delivery ISO 1217 AIR-PRODUCTSSRL Air Products SRL Laprida 631 (1870) Avellaneda Pcia. De B uenos Aires, Argentina Tfax 00-54-11-4222-1008/7725-0196 www.airproducts.com.ar [email protected]