720i EDGE
14Pages

Unpacking Warning After unpacking the device, make sure there is no damage from transportation and that your order is complete. In the event of damage or an incomplete delivery, contact us at support@air8.tech or +34 937 374 430. Do not throw away the original box instantly. It can be reused for packing in the event you need to return the device. Dispose of the packaging material responsibly. Packaging materials should be kept away from children. Safety instructions Read the safety instructions carefully before installing and starting the device. By not following the safety instructions you...

If candles or gas ovens are in use in the same room and at the same time as the device, open the windows occasionally. Do not cover the air inlet or outlet. This can destroy the motor of the ventilator. Do not operate the device near heat sources such as heaters, open fires or direct sunlight. The plastic parts can become deformed. The unit does not serve as a fan replacement as it considerably shortens the service life of the filter. The device must not be used in an environment containing high levels of dust or chlorine. Do not place heavy objects on top of the unit. Keep the device out...

Device description Figure 1:

Figure 3: Display indicators Commissioning Connecting the device When you plug in the device, the readiness for operation is signalled visually (lights turning on, top air outlet cover opening) and acoustically (ringtones). Caution: Do not plug or unplug the device with wet hands. Power The power switch is used to turn the unit “on” and “off”. By default, the device is set on automatic mode. Mode 1. Manual mode Adjust the fan speed manually. There are 4 wind speed levels, and the photocatalyst filter becomes active when the highest wind speed level is activated. 2. Automatic mode The device...

4. Sleep mode When the sleep mode is activated, all indicators are turned off, except on/off button and sleep mode indicator. Thanks to its air quality sensor, the device will keep on adjusting the wind speed between level 1 and 2. Lock Use the remote-control button to lock/unlock the control panel display. Sterilise Use the remote-control button to turn on/off the UV-GI sterilisation light. Filter reset Please refer to the “Maintenance – Filter replacement” section of this manual. Remote control Press the buttons for the respective function. When you use the remote control, point it...

WIFI Connection Please note that the device is only compatible with 2.4 GHz networks. If you are using a 5 GHz network, it might prevent you from connecting to it. In order to control your device via the app, you need to follow these steps: 1. WIFI Activation To activate the WIFI connection, press the Automatic Mode button for 5 seconds until you hear the signal. The WIFI connecting icon appears blinking on the display of the device. Connect the device to your smartphone Download and install the “TuyaSmart” App on your smartphone. You can find it on the App Store or Google Play Store, and...

There are 2 ways of adding a device: Select the “Add Manually” 1 tab, then go to “Small Home Appliances” 2 and select “Air Purifier” 3 Make sure the air purifier is turned on and the WIFI function as well (indicator rapidly blinks). Then click “Confirm”. Wait for the connection to complete, then click “done” Fill in the ID and password of the available wireless network, it must be the same network that the smartphone is using Control your device via the App Option 2 – Auto Scan • Select the “Auto Scan” 1 tab Choose the desired device from list of “Available Devices Found” 2, then click...

4. Configure and control your device remotely You can edit the name of the device within the App. From the Dashboard you can control your device remotely: Maintenance 1. Cleaning the pre-filter Cleaning the pre-filter: • • • • • • • • • • • Please ensure the product is switched-off and unplugged before proceeding. Disconnect the power cable from the device. Open the backside grid by pulling it out slightly and then lifting it up in order to take it out completely. Rotate the 2 dark grey fixtures by 90 degrees in the direction indicated by the arrows. Take out the filter set using the...

Please ensure the product is switched-off and unplugged before proceeding. Disconnect the power cable from the device. Open the backside grid by pulling it out slightly and then lifting it up in order to take it out completely. Rotate the 2 dark grey fixtures by 90 degrees in the direction indicated by the arrows. Take out the filter set using the handle. Take out the pre-filter carefully using the 2 plastic tabs. Take the HEPA filter and Activated Carbon filter out of the filter set frame and replace them with the new filters. Return the pre-filter by inserting the slats into the filter...