Airfan MFA0021 Datasheet

Product catalog summary

Overview: The document provides technical specifications and performance details for the MFA0021 blower, designed for integration into ventilators used in home care, Bi-Level, and CPAP systems with oxygen injection before the turbine.

Specifications:

Voltage Supply: 24 VDC nominal, 28 VDC maximum.
Motor Type: Brushless without Hall-effect sensors.
Dimensions: Ø55 x 55 mm (Ø2.2 x 2.2 in).
Weight: 0.08 kg (approximately 0.17 lb).
Operating Conditions: Temperature range from +10 to +50°C, humidity from 15 to 95% RH non-condensing, and atmospheric pressure from 660 to 1060 hPa.
Oxygen Compatibility: Yes.

Performance:

Flow Rate: 300 l/min fully opened at 24V.
Power Consumption: 10.0 W at 30 hPa and 30 l/min; 19.0 W at 60 hPa.
Noise Levels: Less than 50 dBa at 10 hPa, less than 61 dBa at 30 hPa, and less than 66 dBa at 60 hPa, measured with blower inlet at 1m.
Lifetime Expectancy: Over 25,000 hours under standard operating conditions.

Design and Customization:

The blower features a naked turbine architecture and is derived from the MFA0020 model without an inner motor cooling system.
Customization options include an optional wiring harness.
The blower is designed for specific integration and can operate in any position or orientation.

Compliance: All values are typical with tolerance classification grade 4 according to ISO 13348 standards.

Catalog excerpts

Blower Designed for Specific Integration AIRFAN naked turbine architecture. The MFA0021 is designed for implementation in ventilators dedicated to Home Care, Bi-Level and CPAP using O 2 injection before the turbine. Derived from the MFA0020 without inner motor cooling system. fully closed LifeTime Type Noise Level * * with Blower inlet @1m Naked turbine * LifeTime expectancy based on standard operating conditions air inlet with O2 flow to patient with blended O2

Open the catalog to page 1

TECHNICAL DATA Voltage supply Motor type Brushless without Hall-effect sensors Dimensions (casing) Atmospheric pressure Oxygen compatibility CUSTOMISATION  with or without inlet tube  Optional wiring harness All values listed are typical values with tolerance classification grade 4 according to standard ISO 13348 CUSTOMISE TO YOUR SPECIFI

Open the catalog to page 2

Airfan MFA0021 Datasheet

Airfan MFA0021 Datasheet

Catalog excerpts

All Airfan catalogs and technical brochures