Airfan MFA0208 Datasheet

Product catalog summary

Specifications
The blower is designed for integration with blended air and is 100% O2 safe. It features a naked turbine architecture with a patented independent motor cooling system, allowing oxygen to be injected before the turbine. It is specifically designed for high acceleration up to 150 BPM for neonatal applications.

Performance
The blower achieves a maximum pressure difference (ΔP max) of 70 hPa when fully closed at 24V and a maximum flow rate (Q max) of 340 l/min when fully opened at 24V. Typical power consumption is 11.3 W at 30 hPa and 30 l/min, and 21.0 W at 60 hPa. The expected lifetime is over 40,000 hours under standard operating conditions. The dynamic transient time is less than 97 ms at 3A max, 92 ms at 6A max, and 86 ms at 10A max. Noise levels are less than 50 dBa at 10 hPa, 61 dBa at 30 hPa, and 66 dBa at 60 hPa, measured with the blower inlet at 1m.

Technical Data
The blower operates on a 24 VDC nominal voltage supply, with a maximum of 28 VDC. It uses a brushless motor with Hall-effect sensors. The dimensions are Ø55 x 85 mm (Ø2.2 x 3.4 in), and it weighs approximately 0.45 kg (1.00 lb). It can function in any position or orientation, within an ambient temperature range of +10 to +50°C and humidity levels of 15 to 95% RH non-condensing. It is compatible with atmospheric pressures from 660 to 1060 hPa and is 100% oxygen compatible.

Customization
The blower can be customized to specific requirements, including wire length options of 150mm or custom lengths.

Catalog excerpts

INNOVATIVE SOLUTIONS Blower designed for specific integration with Blended Air - 100% O2 safe Naked turbine architecture with patented independent motor cooling system. Allows O2 to be injected before the turbine and specifically designed for high acceleration to 150 BPM for neonate applications. 70 hPa fully closed 340 l/mn fully opened P = 11.3 (W) @30 hPa P = 21.0 (W) @60 hPa * LifeTime expectancy based on standard operating conditions * with Blower inlet @1m Segregation to avoid patient air contamination

Open the catalog to page 1

TECHNICAL DATA Voltage supply Motor type Brushless with Hall-effect sensors Dimensions (casing) Atmospheric pressure Oxygen compatibility CUSTOMISATION  with or without inlet tube CUSTOMISE TO YOUR SPECIFICATIONS  Wire Length 150mm or custom All values listed are typical values with tolerance classification grade 4 according to standard I

Open the catalog to page 2

Airfan MFA0208 Datasheet

Airfan MFA0208 Datasheet

Catalog excerpts

All Airfan catalogs and technical brochures