Airfan MFA0290 Datasheet

Product catalog summary

Overview: The AIRFAN blower, specifically the MFA0290 model, is designed for use in ventilators for Acute, Sub-Acute, and Home Care settings. It features a patented motor cooling system and a unique soundproof housing.

Specifications:

Derived from the MFA0300 model.
Maximum pressure (ΔP max) of 76 hPa at 24V when fully closed.
Maximum flow rate (Q max) of 270 l/min at 24V when fully opened.
Typical power consumption: 11.5 W at 30 hPa and 30 l/min, 22.6 W at 60 hPa.
Expected lifetime of over 40,000 hours under standard operating conditions.

Performance:

Dynamic transient time: < 95 ms at 3A max, < 88 ms at 6A max, < 84 ms at 10A max.
Noise levels: < 29 dBa at 10 hPa, < 41 dBa at 30 hPa, < 48 dBa at 60 hPa, measured with blower inlet at 1m.

Customization Options:

Outlet port options: male or female connector (22Ø ISO5356-1) or additional auxiliary ports.
O-ring for air inlet and custom labeling available.
Wire length: standard 150 mm or customizable.

Technical Data:

Voltage supply: 24 VDC nominal, 28 VDC maximum.
Motor type: Brushless with Hall-effect sensors.
Dimensions: 130 x 100 x 61 mm (5.3 x 3.9 x 2.4 in).
Weight: 0.44 kg (approximately 1.00 lb).
Operational in any position or orientation.
Temperature range: +10 to +50°C ambient.
Humidity: 15 to 95% RH non-condensing.
Atmospheric pressure: 660 to 1060 hPa.
No oxygen compatibility.

Catalog excerpts

Blower for Performance & Reliability AIRFAN blower architecture with patented motor cooling system and unique soundproof housing. The MFA0290 is derived from the MFA0300 for implementation in ventilators dedicated to Acute, Sub-Acute and Home Care. fully closed Dynamic transient time * > 40 000 hours* Casing integration * LifeTime expectancy based on standard operating conditions Noise Level * * with Blower inlet @1m 02 after the turbine flow to patient cooling flow out

Open the catalog to page 1

Voltage supply Motor type Dimensions (casing) Atmospheric pressure Oxygen compatibility Brushless with Hall-effect sensors COMPRESSOR MAP Static AP vs Airflow at Constant PWM and Motor Voltage PWM = Pulse Width Modulation AIRFLOW (l/mn) at Sea level conditions - Performance are achieved with AIRFAN controller MFA0900 and nominal Motor Ke Outlet port male or female connector (220 ISO5356-1) or additional auxiliary ports O 0 O-ring for air inlet // 0 Custom label CUSTOMISE TO YOURSPECIFICATIONS Wire Length 150 or custom All values listed are typical values with tolerance classification grade 4...

Open the catalog to page 2

Airfan MFA0290 Datasheet

Airfan MFA0290 Datasheet

Catalog excerpts

All Airfan catalogs and technical brochures