Airfan MFA0300 Datasheet

Product catalog summary

Overview
The AIRFAN blower, model MFA0300, is designed for high performance and reliability, featuring a patented motor cooling system and unique soundproof housing. It is suitable for use in ventilators for Acute, Sub-Acute, and Home Care settings.

Specifications

Maximum pressure (ΔP max) at 24V: 90 hPa when fully closed.
Maximum flow rate (Q max) at 24V: 320 l/min when fully opened.
Typical power consumption: 12.5 W at 30 hPa and 30 l/min; 22.8 W at 60 hPa.
Life expectancy: Over 40,000 hours under standard operating conditions.
Voltage supply: 24 VDC nominal, 28 VDC maximum.
Motor type: Brushless with Hall-effect sensors.
Dimensions: 130 x 100 x 61 mm (5.3 x 3.9 x 2.4 in).
Weight: 0.44 kg (approximately 1.00 lb).
Operating temperature: +10 to +50°C.
Humidity: 15 to 95% RH non-condensing.
Atmospheric pressure: 660 to 1060 hPa.
Integration: Works in any position/orientation.

Performance

Noise levels: <29 dBa at 10 hPa, <40 dBa at 50 hPa, <46 dBa at 100 hPa.
Dynamic transient time: <101 ms at 3A max, <78 ms at 6A max, <68 ms at 10A max.

Customization Options

Outlet port: Male or female connector (22Ø ISO5356-1) or additional auxiliary ports.
O-ring for air inlet.
Low leakage sealing as per ISO80601.
Custom label and wire length (150 mm or custom).

Compliance
All values are typical with tolerance classification grade 4 according to ISO 13348 standards.

Catalog excerpts

Blower for High Performance & Reliability AIRFAN blower architecture with patented motor cooling system and unique soundproof housing. The MFA0300 is perfectly suited for implementation in ventilators dedicated to Acute, Sub-Acute and Home Care. fully closed Dynamic transient time * > 40 000 hours* Casing integration * LifeTime expectancy based on standard operating conditions Noise Level * * with Blower inlet @1m 02 after the turbine flow to patient cooling flow out

Open the catalog to page 1

TECHNICAL DATA Voltage supply Motor type Brushless with Hall-effect sensors Dimensions (casing) Atmospheric pressure Oxygen compatibility CUSTOMISATION  Outlet port male or female connector (22Ø ISO5356-1) or additional auxiliary ports Outlet port  Wire Length 150 or custom  Low Leakage sealing as per ISO80601  O-ring for air inlet CUSTOMISE TO YOUR SPECIFICATIONS All values listed are typical values with tolerance classification grade 4 according to standar

Open the catalog to page 2

Airfan MFA0300 Datasheet

Airfan MFA0300 Datasheet

Catalog excerpts

All Airfan catalogs and technical brochures