Airfan MFAO248 Datasheet

Product catalog summary

Overview: The document provides technical specifications and performance details for a blower designed for blended oxygen and transport care, particularly in portable and emergency applications. It highlights the blower's unique architecture, noise reduction features, and customization options.

Specifications:

Blower Architecture: Features a patented motor cooling system independent of the air inlet flow, designed to reduce vibration and noise.
Performance: Maximum pressure (ΔP max) of 70 hPa at 24V when fully closed, and a maximum flow rate (Q max) of 320 l/min at 24V when fully opened.
Power Consumption: 11.3 W at 30 hPa and 30 l/min, 21.0 W at 60 hPa.
Lifetime: Over 40,000 hours under standard operating conditions.
Noise Level: Less than 52 dBa at 30 hPa with blower inlet at 1m.

Technical Data:

Voltage Supply: 24 VDC nominal, 28 VDC maximum.
Motor Type: Brushless with Hall-effect sensors.
Dimensions: 125 x 91 x Ø64 mm (4.9x3.6xØ2.5 in).
Weight: 0.23 kg (approximately 0.51 lbs).
Operating Conditions: Temperature range from +10 to +50°C, humidity from 15 to 95% RH non-condensing, and atmospheric pressure from 660 to 1060 hPa.
Oxygen Compatibility: 100% O2 compatible.

Customization Options:

Outlet port can be male or female connector (22Ø ISO5356-1) or additional auxiliary ports.
Wire length can be 150 mm or customized.
Custom labeling available.

Additional Features:

Dynamic transient time is less than 97 ms at 3A max, 92 ms at 6A max, and 86 ms at 10A max.
Integration allows operation in any position or orientation.
Segregation to avoid patient air contamination.

Catalog excerpts

Blower for Blended O 2 & Transport care Specific blower architecture with patented motor cooling system fully independent from the air inlet flow. This blower offers a special vibration and noise reduction housing designed for portable applications, including emergency care. Available only on specific request fully closed Dynamic transient time * > 40 000 hours* Casing integration * LifeTime expectancy based on standard operating conditions Noise Level * * with Blower inlet @1m flow to patient (with blended O2) patient air inlet with 02 Segregation to avoid patient air contamination cooling flow out

Open the catalog to page 1

Voltage supply Motor type Dimensions (casing) Atmospheric pressure Oxygen compatibility Brushless with Hall-effect sensors Static AP vs Airflow at Constant PWM and Motor Voltage PWM = Pulse Width Modulation Restricted area depending on your operating conditions n max outlet airT0 < 80°C n Electrical power Po {Watts} No continuous operation allowed AIRFLOW (l/mn) at Sea level conditions - Performance are achieved with AIRFAN controller MFA0900 and nominal Motor Ke Outlet port male or female connector (220 ISO5356-1) or additional auxiliary ports CUSTOMISE TO YOURSPECIFICATIONS Wire Length 150...

Open the catalog to page 2

Airfan MFAO248 Datasheet

Airfan MFAO248 Datasheet

Catalog excerpts

All Airfan catalogs and technical brochures