MFA0206 Datasheet

Product catalog summary

Overview: The document describes the MFA0206 blower designed by AIRFAN for integration into ventilators, including those used for home life support with oxygen injection before the turbine. It is a derivative of the MFA0205 model, lacking an inner motor cooling system.

Specifications:

Pressure and Flow: Maximum pressure (ΔP max) is 79 hPa when fully closed at 24V, and maximum flow (Q max) is 300 l/min when fully opened at 24V.
Power Consumption: 9.3 W at 30 hPa and 30 l/min, and 17.4 W at 60 hPa.
Lifetime: Over 25,000 hours (L10) based on standard operating conditions.
Noise Levels: Less than 53 dBa at 10 hPa, 61 dBa at 30 hPa, and 67 dBa at 60 hPa, measured with blower inlet at 1m.
Dynamic Transient Time: Less than 95 ms at 3A max, 88 ms at 6A max, and 84 ms at 10A max.

Technical Data:

Voltage Supply: 24 VDC nominal, 28 VDC maximum.
Motor Type: Brushless with Hall-effect sensors.
Dimensions: Ø55 x 65 mm (Ø2.2 x 2.6 in).
Weight: 0.10 kg (approximately 0.22 lb).
Operating Conditions: Works in any position/orientation, ambient temperature from +10 to +50°C, humidity from 15 to 95% RH non-condensing, and atmospheric pressure from 660 to 1060 hPa.
Oxygen Compatibility: Yes, with lifetime depending on customer operating conditions.

Customization Options:

Available with or without inlet tube.
External suspension for vibration.
Wire length of 150mm or custom length.

Performance: The blower is designed to handle air inlet with O2 and flow to the patient with blended O2, without requiring cooling. All values are typical with tolerance classification grade 4 according to ISO 13348 standards.

Catalog excerpts

INNOVATIVE SOLUTIONS Blower designed for specific integration AIRFAN's naked turbine architecture. The MFA0206 is designed for implementation in ventilators including Home Life Support with O2 injection before the turbine**. It is derived from the MFA0205 without inner motor cooling system. 79 hPa fully closed 300 l/mn fully opened P = 9.3 (W) @30 hPa P = 17.4 (W) @60 hPa Type Naked turbine * LifeTime expectancy based on standard operating conditions * with Blower inlet @1m ** Oxygen compatibility and lifetime depending on customer operating conditions

Open the catalog to page 1

TECHNICAL DATA Voltage supply Motor type Brushless with Hall-effect sensors Dimensions (casing) Atmospheric pressure Oxygen compatibility CUSTOMISATION  with or without inlet tube  external suspension for vibration  Wire Length 150mm or custom All values listed are typical values with tolerance classification grade 4 according to standard ISO 13348 CUSTOMISE TO YOUR SPEC

Open the catalog to page 2

MFA0206 Datasheet

MFA0206 Datasheet

Catalog excerpts

All Airfan catalogs and technical brochures