MFA0248 Datasheet

Product catalog summary

Overview: The document provides technical specifications and performance details for a blower designed for blended O2 and transport care, emphasizing its use in portable and emergency applications.

Specifications:

Blower Architecture: Features a patented motor cooling system independent from the air inlet flow, with a special housing for vibration and noise reduction.
Performance Metrics: Maximum pressure (ΔP max) of 70 hPa at 24V when fully closed, and a maximum flow rate (Q max) of 320 l/min at 24V when fully opened.
Power Consumption: 11.3 W at 30 hPa and 30 l/min, and 21.0 W at 60 hPa.
Lifetime Expectancy: Over 40,000 hours under standard operating conditions.
Dynamic Transient Time: Less than 97 ms at 3A max, 92 ms at 6A max, and 86 ms at 10A max.
Noise Level: Less than 52 dBa at 30 hPa with blower inlet at 1m.

Technical Data:

Voltage Supply: 24 VDC nominal, 28 VDC maximum.
Motor Type: Brushless with Hall-effect sensors.
Dimensions: 125 x 91 x Ø64 mm (4.9x3.6xØ2.5 in).
Weight: 0.23 kg (approximately 0.51 lb).
Integration: Operates in any position or orientation.
Environmental Conditions: Temperature range from +10 to +50°C, humidity from 15 to 95% RH non-condensing, and atmospheric pressure from 660 to 1060 hPa.
Oxygen Compatibility: 100% O2 compatible.

Customization Options:

Outlet port can be male or female connector (22Ø ISO5356-1) or additional auxiliary ports.
Wire length can be 150 or custom.
Custom labeling available.

Additional Features: The blower includes segregation to avoid patient air contamination and is available only on specific request for flow to the patient with blended O2.

Catalog excerpts

Blower for Blended O 2 & Transport care Specific blower architecture with patented motor cooling system fully independent from the air inlet flow. This blower offers a special vibration and noise reduction housing designed for portable applications, including emergency care. Available only on specific request fully closed Dynamic transient time * > 40 000 hours* Casing integration * LifeTime expectancy based on standard operating conditions Noise Level * * with Blower inlet @1m flow to patient (with blended O2) patient air inlet with 02 Segregation to avoid patient air contamination cooling flow out

Open the catalog to page 1

Voltage supply Motor type Dimensions (casing) Atmospheric pressure Oxygen compatibility Brushless with Hall-effect sensors Static AP vs Airflow at Constant PWM and Motor Voltage PWM = Pulse Width Modulation Restricted area depending on your operating conditions n max outlet airT0 < 80°C n Electrical power Po {Watts} No continuous operation allowed AIRFLOW (l/mn) at Sea level conditions - Performance are achieved with AIRFAN controller MFA0900 and nominal Motor Ke Outlet port male or female connector (220 ISO5356-1) or additional auxiliary ports CUSTOMISE TO YOURSPECIFICATIONS Wire Length 150...

Open the catalog to page 2

MFA0248 Datasheet

MFA0248 Datasheet

Catalog excerpts

All Airfan catalogs and technical brochures