MFA0249 Datasheet

Product catalog summary

Specifications:
The blower is designed for blended O2 and transport care, featuring a patented motor cooling system independent of the air flow inlet. It includes a special vibration and noise reduction housing suitable for portable applications, such as emergency care. Key performance metrics include a maximum pressure of 130 hPa when fully closed and a maximum flow rate of 340 l/min when fully opened at 24V. The typical power consumption is 11.6W at 30 hPa and 21.3W at 60 hPa. The blower has a lifetime expectancy of over 40,000 hours under standard operating conditions.

Performance:
The blower ensures segregation to avoid patient air contamination and operates with a noise level of less than 52 dBa at 30 hPa. It has a dynamic transient time of less than 97 ms at 3A max, 92 ms at 6A max, and 86 ms at 10A max.

Technical Data:
The blower operates on a 24 VDC power supply and uses a brushless motor with Hall-effect sensors. It has dimensions of 125 x 91 x Ø64 mm and weighs approximately 0.23 kg. It is designed to work in any position or orientation and is compatible with 100% O2. The operational environment includes temperatures from +10 to +50°C, humidity from 10 to 95% RH non-condensing, and atmospheric pressure from 660 to 1060 hPa.

Customization Options:
Customizable features include the outlet port (male or female connector, 22Ø ISO5356-1), wire length, and custom labeling. The blower can be tailored to specific requirements.

Catalog excerpts

Blower for Blended O 2 & Transport care Specific blower architecture with patented motor cooling system fully independent from the air flow inlet. This blower has a special vibration and noise reduction housing designed for portable applications, including emergency care. fully closed Dynamic transient time * > 40 000 hours* Casing integration * LifeTime expectancy based on standard operating conditions Noise Level * * with Blower inlet @1m flow to patient (with blended O2) patient air inlet with 02 Segregation to avoid patient air contamination cooling flow out

Open the catalog to page 1

TECHNICAL DATA Voltage supply Motor type Brushless with Hall-effect sensors Dimensions (casing) Atmospheric pressure Oxygen compatibility CUSTOMISATION  Outlet port male or female connector (22Ø ISO5356-1) or additional auxiliary ports Outlet port  Wire Length 150 or custom  Custom label All values listed are typical values with tolerance classification grade 4 according to standard ISO 13348 CUSTOMISE TO YOUR SPEC

Open the catalog to page 2

MFA0249 Datasheet

MFA0249 Datasheet

Catalog excerpts

All Airfan catalogs and technical brochures