MFA0295 Datasheet

Product catalog summary

Overview
The AIRFAN blower architecture is designed for performance and reliability, featuring a unique soundproof housing. It is ideal for use in ventilators for Acute, Sub-Acute, and Home Care settings. The model MFA0295 is an adaptation of the MFA0290, optimized for oxygen management without an inner motor cooling system.

Specifications

Maximum pressure (ΔP max) at 24V: 77 hPa when fully closed.
Maximum flow rate (Q max) at 24V: 290 l/min when fully opened.
Typical power consumption: 10.5 W at 30 hPa and 30 l/min; 21.5 W at 60 hPa.
Expected lifetime: Over 25,000 hours under standard operating conditions.
Voltage supply: 24 VDC nominal, 28 VDC maximum.
Motor type: Brushless with Hall-effect sensors.
Dimensions: 130 x 100 x 61 mm (5.3 x 3.9 x 2.4 in).
Weight: 0.45 kg (approximately 1.00 lb).
Operating temperature: +10 to +50°C ambient.
Humidity: 15 to 95% RH non-condensing.
Atmospheric pressure: 660 to 1060 hPa.

Performance

Noise levels: <29 dBa at 10 hPa, <41 dBa at 30 hPa, <48 dBa at 60 hPa.
Dynamic transient time: <95 ms at 3A max, <88 ms at 6A max, <84 ms at 10A max.

Customization Options

Outlet port: Male or female connector (22Ø ISO5356-1) or additional auxiliary ports.
O-ring for air inlet.
Custom label and wire length (150 mm or custom).

Additional Notes

Oxygen compatibility and lifetime depend on customer operating conditions.
All values are typical with tolerance classification grade 4 according to ISO 13348.

Catalog excerpts

INNOVATIVE SOLUTIONS Blower for Performance & Reliability AIRFAN blower architecture with unique soundproof housing. Perfectly suited for implementation in ventilators dedicated to Acute, Sub-Acute and Home Care. The MFA0295 is derived from the MFA0290 without an inner motor cooling system for Oxygen management**. 77 hPa fully closed 290 l/mn fully opened P = 10.5 (W) @30 hPa P = 21.5 (W) @60 hPa > 25 000 hours* Casing integration transient . • * time * LifeTime expectancy based on standard operating conditions * with Blower inlet @1m ** Oxygen compatibility and lifetime depending on customer operating conditions

Open the catalog to page 1

Voltage supply Motor type Dimensions (casing) Atmospheric pressure Oxygen compatibility Brushless with Hall-effect sensors 130 x 100 x 61 mm (5.3 x 3.9 x 2.4 in) depending on customer operating conditions Static AP vs Airflow at Constant PWM and Motor Voltage PWM = Pulse Width Modulation AIRFLOW (l/mn) at Sea level conditions - Performance are achieved with AIRFAN controller MFA0900 and nominal Motor Ke Outlet port male or female connector (220 ISO5356-1) or additional auxiliary ports O 0 O-ring for air inlet 0 Custom label Wire Length 150 or custom

Open the catalog to page 2

MFA0295 Datasheet

MFA0295 Datasheet

Catalog excerpts

All Airfan catalogs and technical brochures