MFA0296 Datasheet

1 / 2 PagesView full catalog

MFA0296 Datasheet

Product catalog summary

Technical Specifications

Static Pressure: 70 hPa at maximum 24V.
Free Flow Rate: 320 l/min at maximum 24V.
Power Consumption: 10.7 W at 30 hPa and 30 l/min; 19.9 W at 60 hPa.
Lifetime: Over 40,000 hours under standard conditions.
Integration Type: Casing integration.
Dynamic Transient Time: Less than 97 ms at 3A max, 92 ms at 6A max, and 86 ms at 10A max.

Performance and Features

Noise Levels: Less than 29 dBa at 10 hPa, 41 dBa at 50 hPa, and 48 dBa at 100 hPa.
Blower Functionality: Suitable for blended or 100% oxygen with a patented motor cooling system independent from air inlet flow.
Design: Specifically designed for high acceleration up to 150 BPM for neonate applications.
Patient Air Inlet: Segregation to avoid contamination.

Customization Options

Outlet Port: Male or female connector (22Ø ISO5356-1) or additional auxiliary ports.
Inlet Filter: For motor cooling.
O-ring: For air inlet.
Wire Length: 150 or custom length.
Custom Label: Available.

Technical Data

Voltage Supply: 24 VDC nominal, 28 VDC maximum.
Motor Type: Brushless with Hall-effect sensors.
Dimensions: 130 x 100 x 61 mm (5.3 x 3.9 x 2.4 in).
Weight: 0.45 kg (approximately 1.00 lb).
Integration: Works in any position/orientation.
Temperature Range: +10 to +50°C ambient.
Humidity Range: 15 to 95% RH non-condensing.
Atmospheric Pressure: 660 to 1060 hPa.
Oxygen Compatibility: 100% O2 compatible.

Catalog excerpts

Blower for Blended or 100% Oxygen With its patented motor cooling system independent from the air inlet flow, this turbine guarantees a fully homogeneous Air-Oxygen blend. The MFA0296 is specifically designed for high acceleration up to 150 BPM for neonate applications. static pressure Dynamic transient time * Noise Level * Casing integration * with Blower inlet @1m * LifeTime expectancy based on standard operating conditions Segregation to avoid patient air contamination motor cooling air inlet flow to patient (with blended O2) cooling flow out

Open the catalog to page 1

Voltage supply Motor type Dimensions (casing) Atmospheric pressure Oxygen compatibility Brushless with Hall-effect sensors Static AP vs Airflow at Constant PWM and Motor Voltage PWM = Pulse Width Modulation Restricted area depending on your operating conditions n max outlet air V < 80*C u Electrical power Po (Watts) No continuous operation allowed AIRFLOW (l/mn) at Sea level conditions - Performance are achieved with AIRFAN controller MFA0900 and nominal Motor Ke Outlet port Outlet port male or female connector (220 ISO5356-1) or additional auxiliary ports O 0 O-ring for air inlet 0 Custom label...

Open the catalog to page 2

MFA0296 Datasheet

MFA0296 Datasheet

Catalog excerpts

All Airfan catalogs and technical brochures