AIR PURIFICATION AND DISINFECTION SYSTEMS C-Line. In-duct solutions AL C-Line systems are designed to clean dust, smoke, allergens, viruses, and bacteria from supply and exhaust air, and to remove unpleasant odors. The system efficiently protects premises from penetration of all kinds of mechanical and biological aerosols, and chemical pollutants. The AL C-Line is designed to purify air in ventilation systems in healthcare settings, malls and business centers, offices, hotels, schools, restaurants, manufacturing facilities, and residential buildings. The AL C-Line does not emit any harmful substances into the ambient air. All reactions take place inside the unit. Replaceable elements are disinfected during operation and do not require any special disposal methods. AL C-Line solutions remove all types of pollutants, mechanical (aerosols), chemical, and microbiological. Toxic substances are not released into the atmosphere thanks to the AL air cleaning systems. Reduction of energy consumption Because the supply air is purified, the energy that would be used for preconditioning outside air can be conserved and the systems can recirculate more air. Low airflow resistance (less than 250 Pa) but high filtration efficiency. Systems in the AL C-Line can also be installed in existing ventilation systems without major upgrades. Airlife Swiss AG [email protected] www.airlife.swiss

Design overview 1. Pre-filter – This filter retains large particles of dust and ash. Filtration class is M5-M6 (EN 1822, EN 799). 2. Aerosol charging unit – This unit ensures a symmetrical electrostatic field inside the element and charges 99.8% of aerosols with sizes between 0.1-100 μm and a linear velocity of up to 4 m/s. Basic characteristics Ventilation capacity: Supply voltage: Class of protection against electrical shock under IEC 61140: Class of enclosure protection under IEC 60529: Working ambient temperature: Ambient relative air humidity for operation at 25˚C: Aerodynamic resistance...