pNeuton model A

pNeuton model A

pNeuton model A

Product catalog summary
Overview: The pNeuton Model A is a transport ventilator designed for critical care patient support, suitable for both noninvasive and invasive ventilation. It features an integrated demand flow CPAP system and variable oxygen selection, making it versatile for various medical settings, including MRI compatibility with remote alarm output.
Key Features:
  • Simple controls for Tidal Volume, Respiratory Rate, and Pressure Limit, allowing for volume-targeted or pressure-limited ventilation.
  • Operates without electrical power, suitable for emergency rooms, special procedures, MRI, and inter-facility transport.
  • All pneumatic operation, eliminating the need for batteries or external power.
  • Seamless mode changes from CPAP face mask to invasive ventilation.
  • Low spontaneous work of breathing, comparable to other critical care ventilators.
  • Integrated all-pneumatic alarm system with remote alarm capability for patient circuit disconnects and low gas supply.
  • Mandatory and spontaneous breaths at 100% or 65% oxygen to extend oxygen tank life.
Specifications:
  • Pneumatically operated for pediatric and adult patients over 23 kg.
  • Demand flow system supports spontaneous breathing up to 140 L/min.
  • Modes of Operation: CMV, IMV, CPAP, Pressure Limit.
  • Fixed mandatory breath flow rate at 36 L/min.
  • MRI compatible up to 3 T static field strength.
  • Weight: 6.5 pounds (3 kg); Dimensions: 5"H x 10"W x 7"D.
  • Input gas requirement: 55 psi ± 15 psi.
  • Meets ASTM and ISO standards for transport ventilators.
  • Respiratory Rate: 3 to 50 bpm; Tidal Volume: 360 to 1,500 ml; Peak Pressure: 15 to 75 cm H2O; PEEP/CPAP: 0 to 20 cm H2O.
  • Oxygen options: 100% or 65%.
Alarm System:
  • All pneumatic alarm system with no batteries required.
  • Automatic reset when alarm condition resolves, with a one-minute silence/reset button.
  • Low oxygen inlet pressure alarm (below 30 psi).
  • Remote alarm output capability.
Contact Information: Distributed by Airon Corporation, Melbourne, Florida, USA. For more information, visit www.AironUSA.com.
See more

Catalog excerpts

pNeuton model A-1

Critical Care Transport Ventilation for hospitals, air transport and disaster preparation 20 pNeuton model A transport ventilator with CPAP designed for critical care patient support Noninvasive or invasive ventilation Integrated, demand flow CPAP system Variable oxygen selection MRI compatible with remote alarm output Patient disconnect and low gas alarms pNeuton is simple and versatile pNeuton has simple-to-use controls – Tidal Volume, Respiratory Rate and Pressure Limit – for volume-targeted or pressure-limited ventilation. With a built-in high output demand flow CPAP system, critical care ventilation needs are optimized for spontaneous and mandatory breaths. Operating without the need of electrical power, the ventilator can care for the most difficult patients from the emergency room to special procedures / MRI; for inter-facility transport and wherever your patient may be located. pNeuton has these unique performance benefits All pneumatic operation, no batteries or external power needed to provide ventilation Change modes to meet patient needs - CPAP face mask to invasive ventilation seamlessly and without interruption Low spontaneous work of breathing comparable to other critical care ventilators Integrated all-pneumatic alarm system with remote alarm capability keeps you alerted to patient circuit disconnects and a low gas supply Mandatory and spontaneous breaths at 100% or use 65% oxygen to prolong your oxygen tank transports

 Open the catalog to page 1
pNeuton model A-2

Pneumatically operated for use on pediatric and adult patients > 23 kg Demand flow system for spontaneous breathing to 140 L/min Pressures displayed on manometer Modes of Operation: CMV, IMV, CPAP, Pressure Limit Mandatory breath flow rate is fixed at 36 L/min MRI compatible: up to 3 T static field strength, 6.9 G/cm spatial field gradient, 300 V RF power, shielded Weight: 6.5 pounds (3 kg) Dimensions: 5"H x 10"W x 7"D (13 x 25 x 18 cm) Input gas requirement: 55 psi ± 15 psi (3.8 bar ± 1 bar) Meets International Standards for transport ventilators: – ASTM: Ventilators Intended for Use in Critical...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.