Centroclave - Product Description
31Pages

{{requestButtons}}

Catalog excerpts

Centroclave - Product Description - 2

6. Laboratory Version with Bio Hazard Risk - Special Specifications Product Description - Centroclave Series

Open the catalog to page 2
Centroclave - Product Description - 3

These equipments have a high quality standard, are fully tested in order to grant a high service level and a good performance. The steam sterilizers Centroclave series has been designed to answer the most demanding requirements of steam sterilization of medical devices and in accordance with the European and ISO standards and regulations. The steam sterilizer Centroclave is also manufactured in a version for Laboratory purposes. It is with pride and satisfaction we note that this equipment has deserved your approval and preference, therefore we will do everything on our hands to maintain...

Open the catalog to page 3
Centroclave - Product Description - 4

Available models The Centroclave series is a free floor standing, front loading sterilizer, prepared for to sterilize hospital, Laboratory and Bio hazard instruments and materials. The equipment has a built in steam generator. The available models in the steam sterilizers Centroclave series are listed here: Product Description – Centroclave Series

Open the catalog to page 4
Centroclave - Product Description - 5

The steam sterilizers Centroclave series has the following available working programs, accessible to the operator: Executable cycles and corresponding phases The steam sterilizer Centroclave includes in Hospital standard version the programming of 9 working cycles that are intended to answer all foreseeable needs in steam sterilization process: • CYCLE 1: Heating up cycle. Cycle for the pre-heating of the sterilizer chamber Phases: - Pre-conditioning - Steam admission - Sterilization at 121° C - Exhaust - Post treatment - Airing - End Product Description - Centroclave Series

Open the catalog to page 5
Centroclave - Product Description - 6

• CYCLE 2: Bowie & Dick test cycle Cycle to detect air pouches, vacuum pump malfunction and verification of steam penetration conditions Phases: - Pre-conditioning - Steam admission - Sterilization at 134° C - Exhaust - Post treatment - Airing - End Product Description - Centroclave Series

Open the catalog to page 6
Centroclave - Product Description - 7

• CYCLE 4: Cycle for wrapped Instruments Cycle for glassware, utensils and wrapped surgical instruments. Phases: - Pre-conditioning - Steam admission - Sterilization at 134° C - Exhaust - Post treatment - Airing - End Product Description - Centroclave Series

Open the catalog to page 7
Centroclave - Product Description - 8

• CYCLE 6: Cycle for Containers Cycle for instruments in containers, particularly heavy loads Phases: - Pre-conditioning - Steam admission - Sterilization at 134° C - Exhaust - Ventilation - Post treatment - Airing - End Product Description - Centroclave Series

Open the catalog to page 8
Centroclave - Product Description - 9

CYCLE 8: Cycle for wrapped temperature Sensitive Materials Cycle for thermo-sensitive wrapped materials. Phases: - Pre-conditioning - Steam admission - Sterilization at 121° C - Exhaust - Post treatment - Airing - End Product Description - Centroclave Series

Open the catalog to page 9
Centroclave - Product Description - 10

• CYCLE 16: Cycle for cleanness of the chamber (maintenance) Cycle for the cleanness of the sterilization chamber. - Open the load door - Close the load door Note: As option it is possible to provide other sterilization cycles, in accordance with client specification. • CYCLE 1: Heating up cycle. Cycle for the pre-heating of the sterilizer chamber Phases: - Pre-conditioning - Steam admission - Sterilization at 121° C - Exhaust - Post treatment - Airing - End Product Description - Centroclave Series

Open the catalog to page 10
Centroclave - Product Description - 11

• CYCLE 2: Bowie & Dick test cycle Cycle to detect air pouches, vacuum pump malfunction and verification of steam penetration conditions Phases: - Pre-conditioning - Steam admission - Sterilization at 134° C - Exhaust - Post treatment - Airing - End Product Description - Centroclave Series

Open the catalog to page 11
Centroclave - Product Description - 12

• CYCLE 4: Cycle for wrapped Instruments Cycle for glassware, utensils and wrapped surgical instruments. Phases: - Pre-conditioning - Steam admission - Sterilization at 134° C - Exhaust - Post treatment - Airing - End Product Description - Centroclave Series

Open the catalog to page 12
Centroclave - Product Description - 13

CYCLE 11(*): Laboratory cycle. Pre vacuum and fast exhaustion Phases: - Pre-conditioning - Steam admission - Sterilization 121° C - Exhaust - Post treatment - End Product Description - Centroclave Series

Open the catalog to page 13
Centroclave - Product Description - 14

CYCLE 13(1): Laboratory cycle. Pre vacuum and slow exhaustion - Pre-conditioning - Steam admission - Sterilization 121° C - Exhaust - Post treatment - End Product Description - Centroclave Series Time and Sterilization temperature can be selected by user, for cycles n° 11 to n°14.

Open the catalog to page 14
Centroclave - Product Description - 15

• CYCLE 16: Cycle for cleanness of the chamber (maintenance) Cycle for the cleanness of the sterilization chamber at day start, when chamber is cold. - Open the load door - Close the load door Note: As option it is possible to provide other sterilization cycles, as client specification. The user that knows the password has permission to alter parameters (time and temperature of sterilization, designation and description of Laboratory cycles. The parameters by default are the ones mentioned above. • CYCLE 1: Heating up cycle. Cycle for the pre-heating of the sterilizer chamber Phases: -...

Open the catalog to page 15
Centroclave - Product Description - 16

• CYCLE 2: Bowie & Dick test cycle Cycle to detect air pouches, vacuum pump malfunction and verification of steam penetration conditions Phases: - Pre-conditioning - Steam admission - Sterilization at 134° C - Exhaust - Post treatment - Airing - End Product Description - Centroclave Series

Open the catalog to page 16
Centroclave - Product Description - 17

• CYCLE 10: Cycle for Biologic risk level 3 Cycle for materials of Bio hazard risk level 3 Phases: - Pre-conditioning - Steam admission - Sterilization at 134° C - Rapid Exhaust - Post treatment Product Description - Centroclave Series Time and Sterilization temperature can be selected by operator

Open the catalog to page 17
Centroclave - Product Description - 18

• CYCLE 11: Cycle for Biologic risk level 3 Cycle for materials of Bio hazard risk level 3 Phases: - Pre-conditioning - Steam admission - Sterilization at 134° C - Rapid Exhaust - Post treatment Product Description - Centroclave Series Time and Sterilization temperature can be selected by operator

Open the catalog to page 18
Centroclave - Product Description - 19

• CYCLE 16: Cycle for cleanness of the chamber (maintenance) Cycle for the cleanness of the sterilization chamber at day start, when chamber is cold. - Open the load door - Close the load door Note: As option it is possible to provide other sterilization cycles, as per client specification. Product Description - Centroclave Series

Open the catalog to page 19

All Ajcosta catalogs and technical brochures

  1. Uniclave 99

    5 Pages

  2. Steri 21

    12 Pages