FINGERFIX PLIERS

Product catalog summary

Product Overview:
FINGERFIX Pliers, reference number 0227 02 00, are specialized tools designed for bending and cutting K-wires with diameters ranging from 1 mm to 1.6 mm. These pliers are engineered to bend K-wires without applying mechanical stress during bone traversal.

Specifications:

Length: 16.3 cm
Weight: 197 g
Material: Stainless steel
Warranty: 5 years (1 year for the jaws)

Functionality:
Bending:

The K-wire is inserted laterally into one of the slots on the lower jaw of the pliers.
The bending operation involves the pin being pushed backward by the upper jaw's nose and guided by a groove.
The right slot accommodates pins of 1.6 mm or 1.2 mm, while the left slot is for pins of 1 mm or 1.2 mm.
Only 20 mm of the pin needs to protrude from the skin for effective bending.

Cutting:

The pin is fully inserted into the cutting aperture, similar to a cigar cutter.
The pliers cut by shearing, resulting in a clean, burr-free surface.

Usage Techniques:

Cut
Bend
Crimp

Additional Notes:

Photographs demonstrate cuts on a 1.6 mm diameter Kirschner wire.
The pliers are designed to make surgical techniques simple and easy.

Catalog excerpts

FINGERFIX Pliers THREE DIFFERENT WAYS SURGICAL TECHNIQUE: FINGERFIX TO USE FINGERFIX PLIERS PLIERS MAKES IT SIMPLE AND EASY. FINGERFIX Pliers can bend and cut K-wires measuring 1 mm to 1.6 mm in diameter. FINGERFIX Pliers were designed in order to bend a K-wire without applying mechanical stress while traversing bone. CUTTING BENDING Positioning: The K-wire is inserted laterally in one of the slots of the lower jaw. Bending : Bending a 1.5 mm ø Kirschner wire. During the bending operation, the pin is pushed backwards by the nose of the upper jaw and guided by a small groove. The right lateral...

Open the catalog to page 2

FINGERFIX PLIERS

FINGERFIX PLIERS

Catalog excerpts

All AKED catalogs and technical brochures