Cut4Custom
4Pages

Catalog excerpts

Cut-4-Custom LSO Cut-4-Custom TLSO Cut-4-Custom LSO+ Cut-4-Custom TLSO+

Heat in 70 - 800C oven or use a heat gun for about 5 minutes Mold back to patient Secure with abdominal binder or elastic wrap Use pre-attached straps to secure heated front to back CUT -4-CUSTOM When you need a custom LSO or TLSO NOW! • Front and Back Cut-4-Custom sections have straps pre-attached. Both sections are ready to be heated and custom molded to patient. • 4 heights to accommodate prescription and patient anatomy: TLSO, TLSO+ (taller) LSO, LSO+ (taller abdominal section). • Backs and Fronts sold separately and interchangeable. • Optional washable covers add attractive appearance...

Open the catalog to page 2

Mold front to patient Secure with abdominal binder or elastic wrap Apply optional soft cover in less than an hour!!! 3D-Lite is an open weave polyester material, impregnated with a non-toxic resin to form an innovative low temperature thermoplastic. It is woven 3-Dimensionally to offer: 1-Patient-Visit • Becomes soft - ready to mold to patient contours in less than 10 minutes • Solidified & Finished LSO or TLSO in approximately 20 minutes Optimum draping and moldability • Stretch in only one direction • Rigidity in all directions Low Temperature Thermoplastic • Heat moldable at 160o F • May...

Open the catalog to page 3

Item No. & Sizing Chart 3D-LITE™ Cut-4-Custom LSO & TLSO Description Plastic front Plastic back Cover front Cover back Edging material Edging material Size Start by measuring the waist circumference. Take vertical measurement and then select size from table below. Total height front in cm Total height back in cm TLSO, XL/XXL TLSO+, XL/XXL Symphysis Pubis Scapular Spine Sacrococcygeal Joint Illustration showes approx. height form the two version, LSO/TLSO IMPORTANT! When applying the pre-cuts, it is important to wrap the material, LSO+, XL/XXL Sternal Notch using either elastic wrap or a...

Open the catalog to page 4