Thermoplastic 2020
20Pages

^f-LITE® 3D-LITE™ Table of Contents ■ Materials X-LITE® Technology 4-6 X-LITE® Edging Tape 15 X-LITE® Thermoplastic Hook 16 X-LITE® Mixed Color Elastic Bandage 17 Cast Scissor Plastic Handle 18 Super Cast Scissor 18 cm 18 Strava Splint Bath 19

T X-LITE® is an airy and lightweight Low Temperature Thermoplastic material engineered to meet your splinting, bracing and casting demands. The material is made from a 100% cotton mesh that has been impregnated with a non-toxic thermoplastic resin. All reactive substances in the thermoplastic have been cured, which means it does not contain any residues in unreacted form. X-LITE® is a NON-Toxic material and emits no harmful substances when heated, applied or in the drying process. The material can be applied without the use of gloves and special ventilation equipment in the casting room and...

CLASSIC is the original X-LITE® material.The large mesh openings give great ventilation. As the strongest material in our range, you can use it for any cast or splint of your choice. PLUS is the latest addition to the X-LITE® range of products. It comes in five colours and has a soft polyester fabric surface. PREMIUM is made of the same cotton mesh but thinner and with smaller openings.This makes PREMIUM even more conformable and stretchable and therefore suitable for upper extemities and children. Learn more about how to work with our materials and find Instructional Videos and Handbook at...

X-LITE® splinting and casting material the environmentally friendly choice! X-LITE is the only casting material made from a cotton base impregnated with a non-toxic, safe polymer. X-LITE® is a NON-Toxic and environmentally friendly product providing a safe working environment and protecting our nature. The polymer in X-LITE is Oxepanone. It belongs to a group of biodegradable polyester PCL which is a well-known implantable biomaterial. Adding only the cotton* X-LITE meets the International Standards for Biodegradation and is sorted as non-hazardous waste. Removing all attachments like hook,...

X-LITE® PLUS is our newest material in the X-LITE® range. It is avalible in five colours and has a soft polyester fabric surface on one side. PLUS is almost similar in strength to Classic and can be used to make any cast or splint of your choice. PLUS is also popular amongst Occupational Therapist for splinting. It comes in both rolls, sheets and dispensers. PLUS rolls have no separator and forms easy and fast directly on the patient. X-LITE® PLUS ROLLS & DISPENSERS Our newest material for casting and splinting. You can choose between rolls in all 5 colors in 7 different widths. Sheets and...

X-LITE® CLASSIC is our original material. It is now available in two new colors -Anthracite and Royal Blue. With its open structure, it is the airiest of the three materials. It is also the strongest and suitable for any splint or cast of your choice. It stretches and conforms well to contours for a perfect fit. CLASSIC comes in sheets, dispenser box and rolls. The rolls have a plastic separator you remove during the working process. X-LITE® CLASSIC ROLLS, SHEETS & DISPENSERS Our original material for casting and splinting in three colors. Choose between rolls, sheets in predetermined...

X-LITE® PREMIUM has a finer mesh than the CLASSIC material and is even more conformable and stretchable. It is very suitable for splints and casts for the upper extremity and children. If you want your splint or cast to be extra strong you might consider adding an extra layer. PREMIUM comes in sheets, dispenser box and rolls. The rolls have a plastic separator you remove during the working process. X-LITE® PREMIUM ROLLS, SHEETS & DISPENSERS Our most conformable material for casting. Choose between rolls, sheets in predetermined practical sizes or 10 m in dispenser box.

3D-LITE™ comes in three different thicknesses, each one suitable for different applications: 3mm Small joint and small anatomy. Excellent for rheumatoid patients. 5mm When more stability is needed, humeral fracture bracing, tibia fracture bracing, elbow splints, paediatric TLSOs. 7mm An extremely rigid material. Very suitable for adult TLSO’s and other applications where maximum rigidity is required.

Cut-4-Custom is a corset in 3D-LITE™ material which consists of a pre-cut front and back section with pre-attached straps. It is easily molded directly on the patient for a custom fitted stable corset. The corset comes as a LSO and TLSO to accommodate prescription and patient anatomy. Find the right size by measuring your patient and compare with the Sizing Chart. Choose a Front and a Back. For patients with a long torso or larger breast or belly choose the Front+ and Back+. These have extra material in the height and also thicker material for increased strength. Both panels are ready to be...

TLSO+ TLSO LSO+ LSO Anterior Posterior

NavyXtra is a newly developed Back Support that offers extra stability with an individually fitted back plate of 3D-LITE™. The back plate of lightweight and breathable Low Thermoplastic Material is easily shaped to fit even the most difficult patients and removable plastic plates in the front contributes to a very stable support of the spine for patients with more severe conditions. The black textile is the same strong and ventilated elastic material used for our range of Navy X products. Indications Burst fractures, Post-op Spinal stabilization, Post-Op Disc Surgery, Degenerative Disc...

STOCKINETTE DISPENSER Our round knitted polyester stockinette is soft and comfortable against the skin. The Stockinette is ribbed which gives a good fit with no wrinkles against the skin. Roll in a practical dispenser box.

X-LITE® FOAM This under-cast padding made out of foam is developed for the X-LITE® range of products. It is slightly water repellent and ventilated. It gives a good suspension which last over time. X-LITE® PLUS EDGING TAPE X-LITE® PLUS Edging tape gives a neat finish to the splint and secures a soft edge. It offers extra stability to the splint since it is made from our splinting material X-LITE® PLUS. It works very well with all our materials including 3D-LITE™. Heat in 70° C warm water.