ALN «2 in 1 RS» [Ref. : RK-2010]
1 / 4Pages

Technical Sheet ALN «2 in 1 RS» [Ref. : RK-2010] The ALN Vena Cava Filter Extraction and/or repositioning kit When removing the ALN Vena Cava Filter, it may be preferable to perform the operation with a pre-curved device to get a better grip of the implant. However, the choice to use either the removal pre-curved kit or the removal straight kit is sometimes difficult. ALN has developed an innovative device combining the two solutions in The angle of the curved section can be modified by lowering the 9FR ID Introduction Sheath. When the 9FR ID Introduction Sheath is lowered by 1cm, the angle of the curved section decreases Ability to change the angle of the pincer depending on the position of the ALN Filter inside the vena cava. When the 9FR ID Introduction Sheath is lowered by 1,5cm, the ALN 2 in 1 RS is strai

2 Technical Sheet ALN «2 in 1 RS» [Ref. : RK-2010] Position of the curved section Straight position ^when the 9FR ID Introduction Sheath is in the down position Extraction: Diagrams The head of the Filter in axis of the Vena Clamp Catheter Clamp Catheter o I O cm CO ^ OC CC tH CL) C <-> «N £ CD 4— CD 0£ Radio-opaque marker Radio-opaque marker opaque marker Curved position ^when the 9FR ID Introduction Sheath is in high position The head of the Filter not centered in the Vena ALN Vena Cava Filter removal procedure: 1. Slowly pass the pincer kit over the head of the Filter and bring the...

• Only by jugular approach • Pincer system specially designed to the Optional ALN Filter • CE Mark 0459 • FDA Approval : 510(k) # k113124 The ALN 2IN1 RS comprises: • a Clamp Catheter (7F sheath, a 3 way rinse valve) • a Dilator • a 9FR ID Introduction Sheath • a Puncture Needle • a J-guidewire

Technical Sheet ALN «2 in 1 RS» [Ref. : RK-2010] Approach Route Reference Jugular RK-2010 Introduction system: Dilator in the Introduction Sheath 610 mm Radiopaque marker band 638 mm 2 black markers to visualize the removal stages Puncture needle Stainless 304 J-Guidewire Stainless 304 with Teflon coating Ethylene oxide sterilization