- Catalogs
- ALN Implants Chirurgicaux
- The ALN Removal Kits
The ALN Removal Kits
The ALN Removal Kits
The document provides technical specifications and procedures for the ALN Removal Kits, specifically the Straight RS and Pre-Curved RS kits, used for the extraction of ALN Vena Cava filters.
- Straight RS (FT.902010): Recommended when the filter head is aligned with the Vena Cava axis.
- Pre-Curved RS (FT.902010/VS2): Used when the filter head is not centered in the Vena Cava.
- Pass the pincer kit over the filter head and position the pincer hooks around it using an image intensifier.
- Slide the introduction sheath over the pincer hooks to grasp the filter head completely.
- Continue sliding the sheath until the black marker band on the pincer catheter is visible, indicating the filter is fully enclosed.
- Composed of a pincer catheter, dilator, 9FR ID introduction sheath, puncture needle, and J-guidewire.
- 8 strands with 90° hooks for a simplified and secure procedure.
- Materials include stainless steel 316 LVM and polyethylene HD.
- Jugular approach only, designed for the optional ALN filter.
- CE Mark 0459 and FDA Approval: 510(k) # k113124.
- Straight RS Kit: Includes a 9FR ID introducer sheath, 9F dilator, 7F catheter, and a pincer kit with a handle and 3-way stopcock. The puncture needle is stainless 304, ø 17 G, and the J-guidewire is stainless 304 with Teflon coating, ø 0.035'', length 150 cm.
- Pre-Curved RS Kit: Similar components as the Straight RS Kit, with specific design for non-centered filter heads.
Both kits are sterilized using ethylene oxide.
Catalog excerpts
8 Strands of different lengths 90° hooks Simplified Procedure + Security Kit Extraction : Diagrams Preferentially using when the head of the ALN filter is in axis of the Vena Cava Preferentially using when the head of the ALN filter is not centered in the Vena Cava Vena Cava Filter removal procedure: 1. Slowly pass the pincer kit over the head of the Filter and bring the Pincer Hooks around the head of the filter (using the image intensifier) Slide the Introduction Sheath slowly over the pincer hooks so that these completely grasp the head of the filter Continue to slide the Introduction Sheath slowly over the filter until the black marker band on the Pincer Catheter is visible ( the filter has then been completely brought into the sheath)
Open the catalog to page 1
ALN Technical Sheet ALN Removal Kits • Only by jugular approach • Pincer system specially designed to the Optional ALN Filter • CE Mark 0459 • FDA Approval : 510(k) # k113124 Removal Straight RS Kit is composed by: • A Pincer Catheter (7F Sheath with two black marks + 8 strand clamp + 3 ways valve) • A Dilator • A 9FR ID Introduction Sheath with radiopaque marker • A Puncture Needle • A J-guidewire ALN Vena Cava Filter
Open the catalog to page 2
Removal STRAIGHT RS Kit Approach Route Reference FT.902010 Introduction system: Dilator in the Introducer Sheath Radiopaque marker band Length = 600 mm 2 black markers to visualize the removal stages Puncture Needle Stainless 304 J-guidewire Stainless 304 with Teflon coating Ethylene oxide sterilization
Open the catalog to page 3
Removal PRE-CURVED RS Kit Approach Route Reference FT.902010/VS2 Introduction system: Dilator in the introducer Sheath 9FR ID Introducer Sheath Polyethylene HD Radiopaque marker band Length = 630 mm Length = 600 mm 2 black markers to visualize the removal stages 3 ways stop cock Puncture needle Stainless 304 J-Guidewire Stainless 304 with Teflon coating Ethylene oxide sterilization
Open the catalog to page 4All ALN Implants Chirurgicaux catalogs and technical brochures
ALN Vena Cava Filter4 Pages
![ALN «2 in 1 RS» [Ref. : RK-2010]](https://img.medicalexpo.com/pdf/repository_me/119276/aln-2-1-rs-ref-rk-2010-178055_1mg.jpg)
