KMD series
1 / 2Pages

Natural convection / Hot air circulating • Slim / Wide model with Inner volume 240L~648L KMD-100HM &-120HL : Slim vertical space saving models with large inner capacity. You can reasonably layout your laboratory. KMD-80,-100 & -120 : wide models easy to use with side panel and with no center piller in the chamber. (Optional models with center piller and to be able to open the right/left door individually are also prepared.) • Maximum 260°C Natural convection / Hot air circulation Every KMD models are provided with triple wall structure (air jacket flow between inner~middle wall and heat resistant material wool between middle~outer wall), so uniform temperature distribution accuracy and stability of cold spot is realized. • Normal temprature/time operation & Program operation Usual constant temperature-time operation, and program operation with maximum 8 steps of temperature-time are available. So, you can use these models for hot air sterilization, material drying or various purposes as material evaluation test. • Safety Double over heat preventors which is automatically set at +10°C and manually set by dial at +30°C~+50°C over the operation set temperature, cut off abnormal temperature rise. Buzzer sounds and red lamp gose on. Also, warning of sensor and heater break, upper temperature set limitter, thermal reray (only-F models) or electric slight leakage breaker keep your safe use. TOKYO JAPAN

© Main swicth © Operation temperature © Set temperature © Output lamp OUT1 : Heater ON OUT3 : Operation OUT4 : Over heat OUT5 : Heater break © Ready operation © Digit sift key © Set value save key © Operation select key © Set value call key © Incremental key (0) Decremental key ® Start/Stop key © Mode key @ Operation lamp © Manual over heat preventor set dial •Specifications are subject to change without notice for improvement. Authorized Agent E-mail:alpco@wonder.ocn.ne.jp URL:http://www.alpco.co.jp