Designed for possibilities. Made for people. Altro Fortis Titanium™ 15 product datasheet brochure Easy to install commercial wall covering 800 377 5597 USA / 800 565 4658 CAN [email protected] www.altro.com discover altro.com For technical support please call and speak with our Technical Services department.

Altro Fortis Titanium 15 TM Walls in commercial buildings can easily be scraped and bumped as people pass, or more serious dents can occur from wheeled traffic such as hospital beds and moving carts. Altro Fortis Titanium 15 has been specifically designed to shield drywall in these busy spaces while offering a quick and simple installation that does not require any specialty training. Its lightly textured surface and homogeneous coloring reduces the visibility of scrapes should they occur. While the palette of six classic colors can offer a versatile and timeless aesthetic across a range of application...

Altro Fortis Titanium 15 shown in color Granite with Altro Lavencia LVT shown in color Sterling.

A complete wall covering system Altro Fortis Titanium 15 was engineered to be a complete, easy to install wall covering system. Our panels and prefabricated corners install quickly with sealant and with your choice of troweled or spray adhesive options. Painted drywall Altro Fortis Titanium 15 saves you time and money on installation costs in areas that do not require hygienic, water-tight and costly cladding. Sealant used to seal top edge of wainscoting Prefabricated corners • 6” x 6” x 118” Internal - fabricated on demand 6” x 6” x 118” External - fabricated on demand Coordinates with panel...

Sealant used to fill seams Sealant used to seal bottom of wainscoting Altro Fortis Titanium 15 preformed external corner Sealant appears lighter above to demonstrate how the panels and corners join. Actual sealant is color matched to panels.

Granite Panels W150/FT01 Sealant A805/01 Internal corners A526/12/01 (48”) / A526/30/01 (118”) External corners A53

Altro Fortis Titanium 15 shown in color Smoke with Altro Cantata shown in color Seal Gray. Altro Fortis Titanium 15 shown in color Candle with Altro Cantata shown in color Bluebell.

System accessories Color-matched sealant Altro W157 acrylic adhesive Altro W147 Spray adhesive Fills gap between abutting panels and corners. May also be used on perimeter See SKUs on page 5 Full spread, trowel application W157 Prefabricated corners 48” corner protector stainless steel (optional) External and internal options available. 6” x 6” x 48” or 6” x 6” x 118” See SKU chart below. Latte Smoke Granite

Altro Fortis Titanium 15 shown in color Ivory with Altro Wood shown in color Spring Maple.

Installation guide This publication is designed to provide technical information to assist Concrete and concrete masonry units in the installation of Altro Fortis Titanium™ 15. The recommendations herein are derived from actual field and laboratory testing and designed All concrete or CMU walls must be made smooth with appropriate to ensure an efficient, professional, and lasting installation. patching compound because the unevenness of the wall may cause telegraphing. Altro strongly suggests that a test area be done to ensure desired adhesion is achieved. If storage temperature is below 68°F...

(C) A bond test is advisable to check adhesive does not react with paint. Color matching sealant seams (D) Altro W157 should not be used for bonding to moisture resistant Altro Fortis Titanium™ 15 panels and prefabricated corners can be specified and installed with color matching sealant. When the seams are (E) Test for moisture with a GE Protimeter, which should give a maximum reading of 16% wood moisture equivalent (WME). caulked a space of a minimum of a 1/16” is required. Spacers must be used during the installation to ensure a consistent seam. The seam is filled with a color matching sealant...

Illustrated installation guide 1 1. Apply adhesive as directed in the Altro Fortis Titanium 15 installation guide. Adhesive can be applied to the wall or back of panel. 2. Install panels per installation instructions. Seam is not to be less than 1/16”. Use a spacer to ensure uniform seam. 3. Allow adhesive to fully cure. Place masking tape on each side of the seam to prevent excess sealant from getting on the panels. 4. Apply 1/8” bead of sealant to the seam. Ensure that an ample amount is applied and the seam is completely filled. Approximate coverage is 90’-100’ per

5. Immediately screed off the excess sealant. Ensure it is flush with the panels. 6. Remove all masking tape. Altro Fortis Titanium 15 shown in color Ivory with Altro Wood shown in color Spring Maple.

Maintenance guide Initial cleaning Continue with regular maintenance. To reduce the build-up of static, cleaning the panels with an anti-static solution or a diluted soap/detergent solution is recommended. Once all panels and joints are installed, remove the protective film and clean all surfaces with an anti-static solution. This is required as the panel will have static build up and any dust in the atmosphere will adhere to the surface of the panel. When cleaning the panels we recommend the temperature of water does not exceed 140˚F (60˚C). Some cleaning agents may adversely affect wall panels....

Altro Fortis Titanium™ 15 Lightly textured commercial wall covering system featuring easy to install LEED facts This product may help contribute to the following credits Altro Fortis Titanium 15 20 year limited product warranty product warranty ASTM D5420 Gardner Impact 52 inch lbs tested as wall assembly Environmental quality Low emitting materials, walls Environmental quality Impact resistance Fire and smoke Tensile strength Dielectric strength Dielectric constant Thermal conductivity Water absorption Discover more of our sustainability story and credentials at altro.com Flexural strength Low...