ALLUNGA 0.035”

Product catalog summary

Overview: The ALLUNGA PTA Balloon 0.035” is a high-performance balloon catheter designed for peripheral vascular applications. Manufactured by QualiMed Innovative Medizinprodukte GmbH in Germany, it is CE Mark approved and features a low-profile design for enhanced maneuverability and efficiency.

Technical Specifications:

Balloon Catheter Type: Semi-Compliant OTW
Guidewire Compatibility: 0.035” (0.89 mm)
Introducer Sheath Sizes: 5 F to 9 F
Nominal Pressure: 7 bar for 3 mm to 12 mm diameters
Rated Burst Pressure: 13 bar for Ø 3 mm, 10 bar for Ø 3.5 mm to 12 mm
Catheter Lengths: 80 cm, 120 cm, 150 cm
Balloon Material: Pebax with hydrophilic coating
X-ray Markers: Platinum markers at proximal and distal ends

Key Features & Benefits:

Ultra-low entry profile with a beveled tip for crossing difficult lesions.
Maximum flexibility for easy navigation to distal lesions.
Fast inflation and deflation times to reduce procedure time.
Increased pushability for effective force transition.
Reduced radiation exposure due to decreased intervention time.
High rated burst pressure for optimized working range.

Product Range: The ALLUNGA PTA Balloon is available in over 1000 sizes with balloon lengths up to 280 mm, catering to diverse clinical needs.

Competitive Advantage: The ALLUNGA catheter features a smaller tip entrance diameter (0.037”) compared to competitors, enhancing its compatibility and ease of use in complex vascular procedures.

Catalog excerpts

PERIPHERAL VASCULAR ALLUNGA PTA Balloon 0.035" TECHNICAL SPECIFICATIONS » International The Stent Company ALLUNGAPTA Balloon 0.035" ORDER INFORMATION Balloon Catheter Catheter Catheter Length (mm) Length 80 cm Length 120 cm Length 150 cm Minimum Balloon Profile 1.57 mm Minimum Balloon Profile 1.59 mm Minimum Balloon Profile 1.79 mm Minimum Balloon Profile 2.16 mm Recommended introducer sheath amg » International The Stent Company amg international GmbH Boschstrafte 16 D-21423 Winsen Germany Status June 2015 PS ALLUNGA 35_00 Made in Germany Manufactured by QualiMed Innovative Medizinprodukte GmbH | Boschstrafie 16 | 21423 Winsen | Germany | www.qualimed.de

Open the catalog to page 1

ALLUNGA PTA Balloon 0.035" The ALLUNGA PTA Balloon Catheter is a high performance balloon catheter for peripheral indication, The device features an ultra-low profile, semi-compliant balloon combined with a low profile tip. Our focus is to enhance technology by developing devices with Low Entry Tip Profiles, guided by Ergonomic Pushability for your ease of use, especially in complex vessels, Tactile Trackability for enhanced Manoveuring. As an essential feature the Dual Lumen Shaft Technology provides a rapid inflation/deflation time. ORDER INFORMATION Balloon Catheter Catheter Catheter Length...

Open the catalog to page 2

All Amg International catalogs and technical brochures

ARTHOSPico
3 Pages
ALLUNGA DF 0.018”
2 Pages
ISTAR
2 Pages
FACILE
3 Pages
ITRIXII
2 Pages