ALLUNGA DF 0.018”

Product catalog summary

Technical Specifications
The ALLUNGA PTA Balloon Catheter is designed for dialysis fistulae with a recommended guidewire of 0.018” (0.46 mm). It features a nominal pressure range of 9 bar for balloon diameters from 4 mm to 7 mm. The rated burst pressure varies by size: 22 bar for 4.0 mm and 5.0 mm, 20 bar for 6.0 mm x 20 mm and 7.0 mm x 20 mm, and 18 bar for 6.0 mm x 40 mm and 7.0 mm x 40 mm. The catheter is available in lengths of 45 cm and 80 cm, with a low entry profile of 0.50 mm (0.020”). The balloon is made of nylon and features platinum X-ray markers at both ends.

Key Features & Benefits
The catheter boasts a very low entry profile with a beveled tip for crossing difficult lesions, maximum flexibility for navigating distal lesions, and fast inflation/deflation times to enhance procedural efficiency. It offers increased pushability, reduced radiation exposure, and a high rated burst pressure for optimal performance.

Compliance Table
The compliance table provides detailed pressure and diameter specifications, ensuring the catheter meets high-performance standards. The ALLUNGA catheter is noted for its ultra-low profile and ergonomic pushability, making it suitable for complex vascular procedures.

Order Information
The catheter is available in various configurations, with balloon diameters ranging from 4 mm to 7 mm and lengths of 20 mm and 40 mm. The minimum balloon profile varies from 0.95 mm to 1.40 mm depending on the diameter.

Manufacturing and Contact Information
Manufactured by QualiMed Innovative Medizinprodukte GmbH in Germany, the catheter is CE mark approved. For inquiries, contact The Stent Company International via phone, fax, or email.

Catalog excerpts

PERIPHERAL VASCULAR ALLUNGA PTA Balloon Catheter Dialysis Fistulae 0.018" TECHNICAL SPECIFICATIONS » International The Stent Company ALLUNGA ORDER INFORMATION Balloon Catheter Minimum Balloon Profile 0.95 mm PTA Balloon Catheter Dialysis Fistulae 0.018 High Pressure Balloon 0 5 mm Minimum Balloon Profile 1.20 mm 40 04PV0060040BSD 08PV0060040BSD Minimum Balloon Profile 1.35 mm Minimum Balloon Profile 1.40 mm Recommended introducer sheath amg » International The Stent Company amg International GmbH BoschstraBe 16 D-21423 Winsen Germany Status June 2015 PS ALLUNGA 18D_00 Made in Germany Manufactured by QualiMed Innovative Medizinprodukte GmbH | BoschstraBe 16 | D-21423 Winsen | Germany | www.qualimed.de

Open the catalog to page 1

The ALLUNGA Dialysis Fistulae Catheter is a high performance balloon catheter for peripheral indication. The device features an ultra-low profile, semi-compliant balloon combined with a low profile tip. Our focus is to enhance technology by developing devices with Low Entry Tip Profiles, guided by Ergonomic Pushability for your ease of use, especially in complex vessels, Tactile Trackability for enhanced Manoveuring. As an essential feature the Dual Lumen Shaft Technology provides a rapid inflation/deflation time. COMPLIANCE TABLE Very low entry profile with a beveled tip to cross the most difficult...

Open the catalog to page 2

All Amg International catalogs and technical brochures

ARTHOSPico
3 Pages
ALLUNGA 0.035”
2 Pages
ISTAR
2 Pages
FACILE
3 Pages
ITRIXII
2 Pages