Reflection Series
2Pages

Reflection Series Surface Mounted Panel Wall System General Specifications The Amico Panel Wall System shall be manufactured by Amico Corporation, in accordance with job specific shop drawings and documents. The following is a general specification, and components listed may not be present or required in final product. The Amico Panel Wall System is listed by Underwriters Laboratories Inc. (UL) in Canada and the United States of America. Amico Corporation manufactures all products in accordance with the CSA Z7396.1-06 standard, National Fire Protection Association (NFPA), NFPA-99c (current edition), National Electric Code (NEC), and the Canadian Electrical Code (CEC). The Panel Wall is Made Up of Several Components: • Rough in assembly to house all services. This component is made out of one steel backing plate with built-in raceways for electrical wiring and built in console boxes for all med gas and electrical devices. This can accommodate blocking for vertical and or horizontal rail systems. This component is installed on the finish wall (after drywall installation). Electrical and med gas terminations are located on the back plate for easy connection to the main sources. Please refer to approved submittal drawings for project specific details and the location of the rough in. • Cabinet frame assembly with removable panels. Frame is constructed with ¾" particle board with laminate finish on all exposed surfaces. This component is installed on the top of the rough in assembly. Please refer to approved submittal drawings for project specific details • Decorative resin panel can be added on top of the panel wall with recessed LED lighting behind. Please refer to approved submittal drawings for project specific details • Accent sconce lighting can be added on the surface of the panel. Please refer to approved submittal drawings for project specific details. Submittals and Verifications Job specific shop drawings shall be produced for each project. These shop drawings will clearly indicate the area of Medical Gas termination, and electrical connection points inside the Headwall System. As Built drawings will be produced, and emailed at the time of shipment. Amico Corporation will manufacture equipment as per signed approval drawings and verifications documents, which are provided in the job specific submittal package. Rough-in assembly enclosure consists of Ga.16 galvanized steel. Stud frame, where applicable, consists of Ga.18 stud/track, size to be determined based on final approval drawings and rough-in. Aluminum front frame assembly has integrated vertical and horizontal rails if project requires. The Panel Wall System has integrated electrical raceways and conduit, providing a single area connection for electrical wiring for each type of power (critical, normal and low voltage/communication). All medical gas piping shall be hard-piped (no flexible gas hose) and brazed to a single point of connection.

Reflection Series Surface Mounted Panel Wall System Materials and Construction Integrated Accessory Rails Numbers of integrated rails (horizontal and vertical) are to match final shop drawings. Accessory rails are clear etched anodized. Laminated aluminum finish where devices are located. All other fascia to be laminated MDF. All Fascia panels (aluminum and laminated MDF) shall be removable for access for easy installation and maintenance of headwall services. Amico Corporation, DISS or Quick connection type, Console Style. Medical gas distribution shall be supplied by pipe drops to the...