Elemental Analysis Your Entire C/N/S/X Lab in One Device multi EA 5100

The multi EA 5100 is your flexible all-round solution for sulfur, nitrogen, chlorine and carbon analysis in solids, liquids and gases. QC analysis, research and contract labs will benefit from its combination of outstanding robustness and sensitivity, plus quality, service and cost-effective 24/7 high-throughput analysis in every matrix. Applications beyond expectations ■ Extensive range of applications without device modification ■ C/N/S/X in solid, liquid and gaseous samples plus TOC, ■ Vertical and horizontal combustion combined in one system ■ Easy extension at any time Simplified operation...

AccessoriesABD - automatic boat drive with cooled sample port ■ Automatic introduction of liquid and solid samples ■ Supports analysis of light volatile and reactive samples ■ Automatic introduction of up to 112 liquid or 35 solid samples ■ Vertical and horizontal operation mode ■ Extendable for cooling or heating option ■ Safe injection of liquid samples up to 100 pL ■ Ideal solution for small sample series ■ Introduction of gaseous samples ■ Doses of unpressurized or pressurized samples at variable dosage speeds ■ For direct dosing of pressurized liquefied gases ■ Fully automatic dosage, evaporation,...

Elevate Your Measurement Performance Smart safety features and pre-configured methods simplify your analysis. Get unparalleled application variety in elemental analysis with the multi EA 5100. Versatile and future-proof The multi EA 5100 analyzes carbon, nitrogen, sulfur and chlorine in solids, liquids and gases without the need for time-consuming device modification. The device enables the determination of important environmental parameters (TOC/AOX/TOX/EOX). The modular design allows the system to be adapted to individual requirements. The base unit can be extended with additional detection...

Outstanding Analysis and Service Quality The multi EA 5100 guarantees competitive advantage of your lab in terms of cost-effectiveness and analysis quality for years to come. Increased uptime Fast analysis is possible in three minutes for liquids and six minutes for solids. With a high sample throughput of over 160 liquid samples and up to 90 solid samples per day, costs are kept very low. Reduced consumption of consumables and less time spent on maintenance, minimize costs even further. Optimal combustion for accurate measurements The integrated flame sensor guarantees matrix-optimized, quantitative...

The unmatched detector diversity of sulfur, nitrogen, carbon and chlorine opens up a wide range of applications and offers the perfect solution for every elemental analysis. Individual detection systems can be combined and adpated as required. Elements Carbon Nitrogen Sulfur Chlorine Measuring principle NDIR spectrometry Chemiluminescence UV fluorescence Coulometry Coulometry Operation range*1 relative: relative: 10,000 mg/L relative: 10,000 mg/L relative: 40,000 mg/L relative: 100,000 mg/L 100 wt-% (organics) absolute: 100 pig N absolute: 100 pig S absolute: 200 pig S absolute: 1.00 mg Cl Limit...

For the chemical, oil and gas industry and beyond With its broad application spectrum and smart features, the multi EA 5100 is ideal for industrial control labs, contract labs and state authorities in the oil and gas, petrochemical and chemical industries. Applications include process control, material testing and waste management. Features such as flame sensor technology for matrix-optimized sample digestion - including most difficult matrices such as oils, VGO, polymers and liquefied gases - and the integrated method library are indispensable for easy routine analysis. ■ Analysis of mineral...

Analytik Jena GmbH Konrad-Zuse-Str. 1 07745 Jena ■ Germany Pictures: Analytik Jena GmbH, p. 8: iStockphoto®/sdlgzps, Adobe©/YvanDube Subjects to changes in design and scope of delivery as well as further technical development! Version 1.0 en ■ 12/2020 888-31004-2-B © Analytik Jena GmbH analytikjena An Endress+Hauser Company