Most effective sterilant Most efficient steriliser 100% Ethylene Oxide Sterilisation Designed specifically for use with the Andersen EOGas Series 3 Sterilisers. These kits are available in three different gas dose and sterilisation bag combinations. The high throughput capacity of the Series 3 multi-load steriliser means it is used principally in hospitals and by medical device manufacturers. They find that the Series 3 reduces equipment turnaround time and saves cost compared to sending out to a contractor. Hospitals enjoy the multi-load flexibility, and they also extend the life of equipment that had previously been damaged by other sterilisation technologies. Medical device manufacturers make use of custom validation to run precisely the right conditions for their product. Typically they manufacture high value, low volume items such as sutures, intra-ocular lenses and brachytherapy strings. Micro-Dose System: EtO is provided in glass ampoules, in plastic cartridges. When activated these release EtO directly to the heart of the load delivering a high level of sterility with a very small amount of gas. Vacuum Sealer: The Series 3 can be supplied with a vacuum sealing unit. This increases the consistency with which the load is prepared each time, as well as increasing the concentration of EtO, compared to a simple induction seal. the future of gas steril

Designed specifically for use with the Andersen EOGas Series 3 Sterilisers, these kits ensure that you never use more gas than you need to with our unique match-load-to-cartridge method. AN1005 Gas Refill Kit This kit is for smaller loads and consists of: • 25 x 4.5g EtO Cartridges • 25 x Humidichip- humidity stabilising chips (AN1071) • 25 x EOGas Dosimeters (AN1087) • 25 x 20-litre sterilisation bags AN1006 Gas Refill Kit This kit is for medium loads and consists of: • 25 x 10.5g EtO Cartridges • 25 x Humidichip- humidity stabilising chips (AN1071) • 25 x EOGas Dosimeters (AN1087) • 25 x 60-litre...