Exos Combined Gas O2 CO2 Leak Burst Analyzer Abiss
2Pages

©XQS Leak O2 or O2&CO2 THE COMPLETE ANALYSER FOR MEASURING GASES AND THE QUALITY OF YOUR PACKAGING BENEFITS Measure, audit, and optimise your packaging process in controlled, reproducible test conditions. Check «easy open» packages with a dynamic burst or resistance measurement. Assess the impact of a leak on the internal atmosphere over time Measure and evaluate the slightest technical changes. Help in creating packaging : Materials, structure, design, etc. How do you perform the inerting and sealing test on your packaging at the same time ? EXOS is easy to use and measures the gas content, the tightness and strength of the seal on all types of packaging in a single test. These three tests are conducted on the same package. EXOS gives you complete information about the initial condition of your packaging so you can identify the expiry date or best-before date. EXOS measures : • The O2 and CO2 content • Leaks down to 5 pm (leak flow rate given in ml/min) • The creep test of the packaging • The strength of seals up to 1.4 bar This adaptable device is suitable for laboratory and production use. EXOS measures and quantifies the essential parameters for your packaging inspections. FEATURES • 6 tests with 1 device: MAP (O2&CO2) + micro leaks + creep test (A&B) + seal strength • Meets standards DIN 55508-1 v rate at constant pressure ASTM F1140 : seal strength ASTM F2054 : burst test • Highest sensitivity in very low overpressure: micro-leaks down to 5 pm at over 10 mbar • Measures breathability: micro-perforated films • Detects clogged circuits • Wholly traceable: use all data analysis possibilities via USB, Ethernet, or directly in your ERP system. • Remote connection and remote maintenance: leverage the power of connected technology. SCOPE OF APPLICATION EXOS is used in the food processing, cosmetics, and pharmaceutical industries for all types of packaging including vacuum sealed, flexible, rigid, semi-rigid, and metal membrane sealed.

eXGS Leak O2 or O2&CO2HOW DOES IT WORK? 1. Select the programme GAS ANALYSIS LEAK MEASUREMENT CREEP TEST or BURST TEST Select a program. Use the The device takes retaining arm to pierce the and analyses a packaging with a needle small amount through a septum. Once of O2 and CO2 the needle is in position, gases. the test can begin. The device measures the airflow needed to maintain a set overpressure in the packaging. Leaks are shown metrologically in ml/ min and equivalent pm. Application of a constant test pressure to the packaging and monitoring of flow and pressure as a function of time....